Author Topic: Couatl engine hasn't started - How to report a problem  (Read 131308 times)

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #510 on: May 22, 2024, 01:36:59 pm »
Hey, i have the problem several times that coatl app hasnt started. When i triy to start coatl64_MSFS manual... there is no .exe in AddonManager/coatl64 for this.

Well, of course it's the antivirus, who mistakenly removed it by assuming it was a threat, because of an antivirus bug.

Quote
If i deinstall gsx and install again... the problem is solved....

Of course, because the installer will restore it.

Quote
but later the same is existing again .... i dont know whats the problem... but i cant use GSX ...

Of course, because the antivirus is still bugged and will remove it again.

So, as explained in the manual ( the Troubleshooting section ), and in the forum so many times, to prevent a defective antivirus from removing the .exe, you must add the WHOLE Addon Manager FOLDER to the antivirus EXCLUSIONS.

After that, run the FSDT Installer again, and perform an Update CHECK, which will restore any missing files. No need to reinstall.

olivers1989

  • Newbie
  • *
  • Posts: 4
Re: Couatl engine hasn't started - How to report a problem
« Reply #511 on: May 22, 2024, 09:51:05 pm »
So is use only Windows 11 Firewall and Viren Scan.... its not possible to add WHOLE Folders..... so in thios case i dont know what to do now...
« Last Edit: May 25, 2024, 11:09:26 am by virtuali »

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #512 on: May 25, 2024, 11:10:44 am »
So is use only Windows 11 Firewall and Viren Scan.... its not possible to add WHOLE Folders..... so in thios case i dont know what to do now...

Remove that inferior antivirus which doesn't even offer offer what the *default* free and included Windows Defender antivirus does. Windows Defender antivirus DOES allow to exclude folders, which is an incredibly important feature that no antivirus should miss.

Pranav_Srinivasan

  • Newbie
  • *
  • Posts: 5
Re: Couatl engine hasn't started - How to report a problem
« Reply #513 on: June 07, 2024, 03:21:36 am »
So the Coualt engine is crashing on me when i request refueling at CYOW (msfs default with no addons other than gsx pro that affects the airport and if I remember correctly I have a texture pack for taxi lines and such). I'm attaching my log file if it helps.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #514 on: June 07, 2024, 11:50:10 am »
That's because you haven't the latest 3.0 update which has fixed this problem.

PooPs1975

  • Newbie
  • *
  • Posts: 2
Re: Couatl engine hasn't started - How to report a problem
« Reply #515 on: June 08, 2024, 12:38:00 pm »
After upgrading to version 3.0, no matter what delay is set for the start of boarding passengers on board the plane, the bus arrives without delay, but empty. And passengers appear after a set time on the bus and begin to board. At the same time, all other GSX services work as expected.
« Last Edit: June 08, 2024, 12:39:32 pm by PooPs1975 »

firepac

  • Newbie
  • *
  • Posts: 5
Re: Couatl engine hasn't started - How to report a problem
« Reply #516 on: June 10, 2024, 08:45:00 pm »
I did post this issue as a separate post several days ago but haven't recieved a useful reply so hoping someone might see it here.

So since updating GSX gets stuck on its loading screen, I have looked through the forums and tried several suggestions. Restarting Couatl, modifying exe.xml etc but no luck.
I have attached the log file. There appears to be a few errors in it but no idea how to resolve. Hoping someone can assist.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #517 on: June 16, 2024, 05:01:39 pm »
I did post this issue as a separate post several days ago but haven't recieved a useful reply so hoping someone might see it here.

Quoting from the manual, Page 95:

Quote
What to do when the menu is stuck on Loading

Most of the time, the problem is fixed this way:

• Close the GSX Menu in the Toolbar

• Check the Couatl icon in the Traybar notification area. If it’s still there, so the program is still running but it got stuck for some reason, right-click on it to show the menu, and select “Restart”

• Always wait a bit before opening the GSX menu again, to let the app enough time to restart. Usually 10-15 seconds it’s fine.

• Open the GSX Menu again, which should now work.

You can GREATLY reduce the chance for this issue to be happening, if you always close the GSX menu from the Toolbar after ending a flight, which is the suggested way to use the menu.

firepac

  • Newbie
  • *
  • Posts: 5
Re: Couatl engine hasn't started - How to report a problem
« Reply #518 on: June 18, 2024, 09:30:21 pm »
Thank you but I have tried that many many times and did it several times after reading your reply to make sure i was following it to the letter. I didnt work. It is still stuck on loading.
« Last Edit: June 19, 2024, 11:45:56 am by virtuali »

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #519 on: June 19, 2024, 11:47:07 am »
Thank you but I have tried that many many times and did it several times after reading your reply to make sure i was following it to the letter. I didnt work. It is still stuck on loading.

This thread, named "How to report a problem", starts with instructions how to create a log, which is the first thing you are supposed to do when reporting an error, especially after the solution suggested doesn't work.

firepac

  • Newbie
  • *
  • Posts: 5
Re: Couatl engine hasn't started - How to report a problem
« Reply #520 on: June 19, 2024, 09:52:07 pm »
Thank you but I have tried that many many times and did it several times after reading your reply to make sure i was following it to the letter. I didnt work. It is still stuck on loading.

This thread, named "How to report a problem", starts with instructions how to create a log, which is the first thing you are supposed to do when reporting an error, especially after the solution suggested doesn't work.

A log which i attached to my first post on this thread and on the separate post i originally made.
However i will attach it here as well to make it easier.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #521 on: June 19, 2024, 11:54:38 pm »
A log which i attached to my first post on this thread and on the separate post i originally made. However i will attach it here as well to make it easier.

Your old log is made for a previous version, so it's not relevant here, and nowhere in your log shows you ever tried to open the menu, it seems you just started the sim, and exited without doing anything with GSX.

Update to the current version, a create a new log *after* the problem happens.

firepac

  • Newbie
  • *
  • Posts: 5
Re: Couatl engine hasn't started - How to report a problem
« Reply #522 on: June 20, 2024, 07:09:55 am »


Your old log is made for a previous version, so it's not relevant here, and nowhere in your log shows you ever tried to open the menu, it seems you just started the sim, and exited without doing anything with GSX.

Update to the current version, a create a new log *after* the problem happens.

New log file attached.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51642
    • VIRTUALI Sagl
Re: Couatl engine hasn't started - How to report a problem
« Reply #523 on: June 20, 2024, 02:41:43 pm »
Same as before, no errors or issues in the log, it just shows you start the sim and exited the sim, without even entering the flight menu, let alone called the GSX menu.

chipster19

  • Newbie
  • *
  • Posts: 6
Re: Couatl engine hasn't started - How to report a problem
« Reply #524 on: July 28, 2024, 08:16:37 pm »
Hello, i have the post message when i want to launch GSX via the menu bar from MSFS.

My log is below

Thanks you