Author Topic: GSX Not Working  (Read 8316 times)

Aaron Liu

  • Newbie
  • *
  • Posts: 7
Re: GSX Not Working
« Reply #15 on: August 19, 2022, 07:08:26 am »
The significant probelm of refueling system is that when I type a specific value to the fuel and it won't make any response, but when I push "SET FULL" or "SET 1/3" or "SET 2/3" it response.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51435
    • VIRTUALI Sagl
Re: GSX Not Working
« Reply #16 on: August 19, 2022, 07:11:47 am »
Shouldn't make any difference. The important thing with a plane with a custom refuel system is that you do this sequence:

- Call the GSX Fuel Truck

- Don't change the fuel until it arrives and tell you to use the Fuel system of the airplane

- Now you can change the fuel quantity, which must be higher than when you called the GSX truck, otherwise it will go away assuming you don't need it anymore.

Aaron Liu

  • Newbie
  • *
  • Posts: 7
Re: GSX Not Working
« Reply #17 on: August 19, 2022, 07:17:59 am »
Alright I'll try it, but just minuted ago I found a new probelm that modify pushing back is unavailable, when I push Quickset pushback and it doesn't work...

Flyboy0284

  • Newbie
  • *
  • Posts: 34
Re: GSX Not Working
« Reply #18 on: August 19, 2022, 01:45:49 pm »
I'm having the jetway issue as well. Reinstalling SODE didn't fix. The jetway will function properly when using the SODE menu to move them, but once GSX activates at the spot the jetway disappears. Everything else in GSX seems to working normally.

gregoryv

  • Newbie
  • *
  • Posts: 28
Re: GSX Not Working
« Reply #19 on: August 19, 2022, 03:34:04 pm »
After last update GSX is completely broken.
On LYBE airport jetways not working.
During another test on EFHK airport , fuel track behavior is weird. After completely refueling, GSX frozen. Restart of Couatl cannot be done. Disabling GSX is not available too.
https://i.imgur.com/UnL3Ygt.png
https://i.imgur.com/sAZAEO0.png

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51435
    • VIRTUALI Sagl
Re: GSX Not Working
« Reply #20 on: August 19, 2022, 03:43:04 pm »
Try to enable logging and check if there's an error in the %APPDATA%\Virtuali\Couatl.log file when it appears stuck.

gregoryv

  • Newbie
  • *
  • Posts: 28
Re: GSX Not Working
« Reply #21 on: August 19, 2022, 04:07:48 pm »
Try to enable logging and check if there's an error in the %APPDATA%\Virtuali\Couatl.log file when it appears stuck.

I saved a flight and reloaded it. After asking for boarding, GSX freezed again. Here the error that I can see on couatl.log:
File ".\GSX\assistanceServices\baggageTrain.py", line 594, in baggageGrabbed
AttributeError: 'TrainOfVehicles' object has no attribute 'setWagonBaggages'
{'Airport': 'EFHK', 'Requested assistance services at': 'Gate 28', 'User Pos': (60.31873333324952, 24.965397222258858, 58.9997 m, 4.44072 m, 137.43143861173812, 0.006023351568728685, -0.0, -0.0, 4.572, 1.0)}

Nothing else.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51435
    • VIRTUALI Sagl
Re: GSX Not Working
« Reply #22 on: August 19, 2022, 04:12:51 pm »
Well, that was useful, try Live Update now, it should be fixed.

FSworx

  • Newbie
  • *
  • Posts: 12
Re: GSX Not Working
« Reply #23 on: August 19, 2022, 04:26:30 pm »
The same with me: since the last update GSX is also no longer usable in FSX.

GSX freezes mostly already during the boarding of the crew on the apron - without error message, without log file. Couatl can no longer be started.

At previously configured jetway gates the error message "No jetway can operate at this position" appears. Sometimes nothing happens at all. It seems that GSX is completely messed up.

I have tried it at different airports with different aircraft - always the same problems.

I have run the installer several times - no change.

Is it possible to reset to the state before the last update without losing personal configurations?

Addendum: live update does not work now either. Error message: "invalid parameter".
« Last Edit: August 19, 2022, 04:32:55 pm by FSworx »

gregoryv

  • Newbie
  • *
  • Posts: 28
Re: GSX Not Working
« Reply #24 on: August 19, 2022, 04:33:55 pm »
Well, that was useful, try Live Update now, it should be fixed.

Thanks a lot Umberto,
Aircraft is loading now although fueling track still has wrong position although aircraft is refueling.
https://i.imgur.com/Jud9rSA.jpg

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51435
    • VIRTUALI Sagl
Re: GSX Not Working
« Reply #25 on: August 19, 2022, 04:35:44 pm »
Aircraft is loading now although fueling track still has wrong position although aircraft is refueling.

Please clarify: is the fuel truck stuck there with no crew animation ? But IS refueling ?

gregoryv

  • Newbie
  • *
  • Posts: 28
Re: GSX Not Working
« Reply #26 on: August 19, 2022, 04:52:02 pm »
Aircraft is loading now although fueling track still has wrong position although aircraft is refueling.

Please clarify: is the fuel truck stuck there with no crew animation ? But IS refueling ?

Yep. fuel truck stuck with no crew animation but it is refueling.

trisho0

  • Sr. Member
  • ****
  • Posts: 367
Re: GSX Not Working
« Reply #27 on: August 19, 2022, 05:05:38 pm »
Ran FSDT Live Update today and loaded 3 sceneries with P3Dv4 and v5 and I get error after calling GSX jetways service. SODE or GSX issue?

Uninstall and reinstall SODE again.
SODE uninstalled and reinstalled. SODE registered. Ran FSDT Live Update.
Jetways disappears with the same error message. Any other try?
Patricio Valdes
« Last Edit: August 19, 2022, 05:12:26 pm by trisho0 »

baggycat

  • Newbie
  • *
  • Posts: 3
Re: GSX Not Working
« Reply #28 on: August 19, 2022, 06:54:17 pm »
I have been running the update a few times and every time I use a jetway, this one disappears.
Have tried a parking stand with no jetways and there the bagage loaders wait for god knows what and do not load the bags.
Also the buses stop in front of the aircraft and passengers stay on the bus!
Uninstalled SODE and reinstalled it, uninstalled gsx and did a fresh install,  did not fix the problem.
I have tried everything at different airports with same results.

           
« Last Edit: August 19, 2022, 07:00:30 pm by baggycat »

gregoryv

  • Newbie
  • *
  • Posts: 28
Re: GSX Not Working
« Reply #29 on: August 19, 2022, 07:07:24 pm »
Also the issue with deboarding:
File ".\GSX\assistanceServices\baggageTrain.py", line 435, in baggageDropped
AttributeError: 'TrainOfVehicles' object has no attribute 'setWagonBaggages'
{'Airport': 'LHBP', 'Requested assistance services at': 'Gate 28', 'Requested parking services to': 'Gate 38', 'User Pos': (47.433630916572255, 19.2584071226238, 155.291 m, 4.41237 m, 223.16297171720404, -0.0015547735383734107, -0.0, -0.0, 4.572, 1.0)}

Deboarding stucked.
https://i.imgur.com/W2VcqSo.png