Author Topic: Pushback ground personal goes below the fuselage...  (Read 1346 times)

raam123

  • Jr. Member
  • **
  • Posts: 54
Pushback ground personal goes below the fuselage...
« on: February 16, 2024, 02:39:08 pm »
I can't find the reason for it...
Tried to use aircraft editor ... nosewheel is marked perfect even pushback procedure is great but when placing/removing the gear pins ground personal goes below fuselage...
How can I fix it ? ::)

raam123

  • Jr. Member
  • **
  • Posts: 54
Re: Pushback ground personal goes below the fuselage...
« Reply #1 on: February 18, 2024, 06:45:33 am »
Anyone ?  ::)

yurirodin

  • Jr. Member
  • **
  • Posts: 64
Re: Pushback ground personal goes below the fuselage...
« Reply #2 on: February 18, 2024, 02:48:16 pm »
What airplane are you having this problem with?

raam123

  • Jr. Member
  • **
  • Posts: 54
Re: Pushback ground personal goes below the fuselage...
« Reply #3 on: February 20, 2024, 05:49:22 am »
CaptainSim 767 GE engines (PW4056 all ok...) sim is P3D.

yurirodin

  • Jr. Member
  • **
  • Posts: 64
Re: Pushback ground personal goes below the fuselage...
« Reply #4 on: February 20, 2024, 02:20:29 pm »
Go to AppData/roaming/virtuali/airplanes - In this folder find the CaptainSim folder with 767 GE engines and open the gsx.cfg file with notepad. Under [aircraft] see if you have the line nosegear = 20.88. If you don't or if the value is something different, make sure it's 20.88 and you should be good. Also, make sure the line bypasspinpos = 0.00 0.00 0.00 is there.
« Last Edit: February 20, 2024, 02:25:43 pm by yurirodin »

raam123

  • Jr. Member
  • **
  • Posts: 54
Re: Pushback ground personal goes below the fuselage...
« Reply #5 on: March 02, 2024, 09:14:18 am »
Go to AppData/roaming/virtuali/airplanes - In this folder find the CaptainSim folder with 767 GE engines and open the gsx.cfg file with notepad. Under [aircraft] see if you have the line nosegear = 20.88. If you don't or if the value is something different, make sure it's 20.88 and you should be good. Also, make sure the line bypasspinpos = 0.00 0.00 0.00 is there.

Thx Yurin.
All fix now, I was missing the bypasspinpos line...