FSDreamTeam forum
FS9 support => Zurich scenery for FS9 => Topic started by: beowulf on September 07, 2008, 11:22:22 pm
-
Hello, iam German,
my English is not soo good, but i think you understand this:
I Installed the newest Installer of LSZH and AES 1.9.7 (but i have deactivated. AES says ever CopyProtection ..Errors)
First i think the Error come from AES. I Deactivated this.
Second i De-Install LSZH with the Program "CCleaner" and also cleaning Registry and Temp`s.
I Reinstall LSZH and activate with my Serial-Nr. I tested the Scenery and load it 3-4 Times in 2 Days.
But today it doesnt work. No Buildings etc. and NO MESSAGE for Trial or others.
I dont know whats going up here ??? :-\ :'(
greetings
beowulf99
-
I Installed the newest Installer of LSZH and AES 1.9.7 (but i have deactivated. AES says ever CopyProtection ..Errors)
This means only two things: either AES is not 1.97, or LSZH is not the current version.
First i think the Error come from AES.
Yes, that error message is generated by AES.
Second i De-Install LSZH with the Program "CCleaner" and also cleaning Registry and Temp`s.
To Uninstall LSZH you should use our Uninstaller. We provide an uninstaller for a reason. The uninstaller does several things that another utility can't obviously know.
Please, use only the supplied uninstaller (which can be found in the Windows Control Panel, like any Windows program)
But today it doesnt work. No Buildings etc. and NO MESSAGE for Trial or others.
This means is NOT an activation issue. If the registration gets losts, the program will NOT simply disappear: it will go into Trial mode.
If you don't see any buildings, this could be one of these things:
- You installed a old version of the scenery with a new version of the Addon Manager. Or vice versa. you have the correct version of the scenery, with a old version of the Addon Manager. This might be caused by the utility you used in place of our Uninstaller.
To restart from scratch, Uninstall LSZH using our Uninstaller, reply "Yes" to the question of removing the Addon Manager, this will clean up all files.
Then, Clear you brwoser cache, download again the LSZH uninstaller just to be sure, and install it, this will ensure you have the latest version.
After the installation is finished, go into FS9, check the Addon Manager menu, select Zurich and see if it's active or not, with the About option.
-
Thx, I try and reply in few Days.
I have 2 Questions too :
1. I want buy Amsterdam Scenery from Cloud9 in few Days when i become DSL. Can i Install it after LSZH or must i install before LSZH ?
2. In Future I want buy your Chicago Scenery. I have also FlyTampa Midway. Can i use both together ?
3. And i want to buy the Other Scenerys from Cloud9 like LAX, Pisa, Bergen, ...etc
Can i Install it after LSZH or must i install before LSZH ?
thanks very much
beowulf99
-
There are no backward compatibility problems with product handled by the Addon Manager, which includes all Cloud9 products. As long as you have the most current version of everything, they are all guaranteed to work.
There are no problems using O'Hare together with FlyTampa Midway: and if you installed the optional jetway fix that comes with FlyTampa, that is used only to control the loading distance of the default O'Hare, our installer will remove it, because is not needed anymore. Or, you could simply delete that .bgl afterwards.
-
Okay, I unistall LSZH + AES with Windows/Software/Deinstall.
I download LSZH + AddonManager from Cloud9
Second i install AddonManager, then LSZH, then AES (but i activate no Airports)
I start fs9 and run LSZH and looked by AddonManager/About: Scenery is ACTIVE.
Okay i test with AES and reply. thanks a lot
-
I download LSZH + AddonManager from Cloud9
You mean, from here...
There's no Addon Manager from Cloud9. A while ago, Cloud9 used to have its own installer but, since we use the same set of files anyway, it didn't make much sense, so there's only one Addon Manager installer, and it's ours, the link on Cloud9 website points here anyway.
-
Yes, sry i mean yours ;)
-
It doesnt work ! >:(
No Airport Buildings, but in AddonManager/About is the Scenery Active !
Whats here Wrong ?????
I Activated AES 197. I try and De-Install AES 197
-
No Airport Buildings, but in AddonManager/About is the Scenery Active !
If you see the Addon Manger menu, so you can check the status, it means the program runs correctly. If it says the scenery is Active, then it's nothing related to activation in any way.
This leaves with only two options:
- you are not using the latest version of the scenery (download it again if unsure)
- the scenery hasn't been added to the scenery.cfg, because your scenery.cfg was already corrupted. You should have seen a warning coming from our installer.
-
I downloaded LSZH + AddonManager today,
and UNINSTALL AES. And now NO PROBLEMS with LSZH !
The Problem is AES. Iam confused. I have only Original Serial Numbers.
EDIT:
I think i have the Problem solved! After Reinstall AES the Scenery works Perfect !!
Thanks for your help. Best Support !
-
I am annoy my LSZH Scenery not yet perfectly run. I do not see buildings on the airport. About button says that to me the Scenery " Activ" is. Property today Addon manager and LSZH again down-loaded.
AES is deactivated. AES Support Oliver write me, there is a problem with Addon Manager
I wanted to buy in the future also still different products of you, but not if I had as annoyance thereby
pls help i paid for the scenery >:(
-
AES is deactivated. AES Support Oliver write me, there is a problem with Addon Manager
It's you that wrote this, right ? How this could be an Addon Manager problem, then ?
I downloaded LSZH + AddonManager today, and UNINSTALL AES. And now NO PROBLEMS with LSZH !
I think i have the Problem solved! After Reinstall AES the Scenery works Perfect !!
Just be sure you are using the current version of Zurich, and AES 1.97. This will work. If you aren't sure if you have the latest version of Zurich, download it again.
-
i downloaded it again today past 1 hour (my AES LSZH is deactivated).
Oliver`s Post # 4 - look here: http://forum.flightxpress.net/index.php?page=Thread&threadID=12649
i uninstall with windows/software/ FSDT-deinstall. AddonManager too.
then i install LSZH and activate it with my serial#
ist this right?
-
i uninstall with windows/software/ FSDT-deinstall. AddonManager too. then i install LSZH and activate it with my serial#
Yes, this should at least ensure you have the latest LSZH version.
-
OK, i install zurich9_setup.exe with 55172 KB
then i start FS9 (it generate new Scenery.cfg)
i start in the main menu LSZH at daytime
:o it works
i dont understand this. i install / deinstall about over 3 hours and never works
but i think in few days when i arrival / departure the scenery lock up again.
- what about with jfk? i want to try out the Trial-Version. does it hand only the JFK Installer?
-
OK, i install zurich9_setup.exe with 55172 KB
then i start FS9 (it generate new Scenery.cfg)
i start in the main menu LSZH at daytime
it works
Of course it does...
i dont understand this. i install / deinstall about over 3 hours and never works
but i think in few days when i arrival / departure the scenery lock up again.
I'm not sure to understand you here: are you saying that it's works now, but you think it might crash again in a few days ?
what about with jfk? i want to try out the Trial-Version. does it hand only the JFK Installer?
JFK installers only installs JFK scenery files. The files that are shared between all our products, which are the Addon Manager files, are always the same, and are automatically taken from online when the installer starts, this is the same for Zurich, O'Hare and JFK.
-
i dont understand this. i install / deinstall about over 3 hours and never works
but i think in few days when i arrival / departure the scenery lock up again.
I'm not sure to understand you here: are you saying that it's works now, but you think it might crash again in a few days ?
yes. I reported then when i fly from/to LSZH. This is the Problem i have.
-
yes. I reported then when i fly from/to LSZH. This is the Problem i have.
Try with the version you have that is working now. If it happens again, don't do anything, and report back.
-
hi again,
i tested several days and it crash`s again!
Report (AES is Enabled):
After installation and activating i start 2x in LSZH to look.
Then i make 5 Landings with 1 Go Around (Start in other Citys like in EBBR-Brussel)
Today i land in LSZH and i woud start in LSZH few hours later (FS2004 Airportmenu and selected icao LSZH, but after loading: AES Scenery Protection ??? >:(
But the Menu - About Button says ACTIVE
greetings
hopeless beowulf99
-
but after loading:AES Scenery Protection ??? But the Menu - About Button says ACTIVE
This is a message generated by AES and it means that, either the scenery is not the current version, or AES is not the current version. Please, be sure to use latest version of the scenery together with the latest AES version.
-
I have today downloaded a different Filesize-Version of LSZH between from 22.09.2008 i downloaded.
AES is now 1.9.8.a
I test again :-\ and report you in several days/weeks
bye there
beowulf99
PS: I hope we become this in the right Position. I happy to hear that you make LSGG. But i want buy it first when LSZH work to 100%
-
I believe which I have the problem solved:
I use a scenery manager that modify my scenery.cfg if I something install. I install the LSZH Scenery without setting Priority up or down and the LSZH-Scenery works.
When i switch the Priority with my Scenery Manager to my other Swiss Addons, the LSZH is in "Scenery Protection".
I download a other Scenery.cfg Manager and it works now Great ! :D
this Scenery Manager makes trouble perhaps also by other Users with same Problems:
AVSIM.COM
Filename: fs_scenery_manager_v1.4.zip
thank you for help!