FSDreamTeam forum
Products Support => Chicago O'Hare V2 for P3D4 => Topic started by: mexusa12 on August 24, 2019, 03:08:19 am
-
FSDT I have no jetways on my kord v2 I check my other airports KIAH KDFW KMEM KLAS KJFK they all work I purchased before the other kord from DRZEWIECKI DESIGN - but I reinstall that blocking kord so I can used the other 2 {kmdw is that a problem is some one else having this issue need some help here guys
-
- Check which AFCAD GSX is using, in the GSX customization page. This might give you an hint who's causing the conflict, since no jetways will appear if the FSDT AFCAD is not used.
- Be sure the DD KORD has been correctly disabled, including their SODE files in the %PROGRAMDATA%\12pilot\SODE\DrzewiekiDesign folder. The file for KORD shouldn't be there.
-
reads Airport JFKC Chicago Airport Helipad AFCAD C\LM\documents\trafficglobal\airportfacilities\scenery\AF2_JFKC.bgl
scenery customization available from this sources%APPDATA%\VIRTUALLI\GSX\jfkczs.fell.ini
So what do I need to do do I need to delete this jfkc Helipad ?
OK I GOT IT I REMOVED THE JFKC One more question what traffic add on you guys used this traffic global not so good
-
One more question what traffic add on you guys used this traffic global not so good
UT Live.
-
I have this issue too. What do I need to look for in the gsx customization page?
-
I went into the GSX customization menu and noticed that where it said jetway, it said “no jetway”” so I changed it to jetway. However the jetways didn’t appear even after a full restart. Do I need to do something else?
-
reads Airport JFKC Chicago Airport Helipad AFCAD C\LM\documents\trafficglobal\airportfacilities\scenery\AF2_JFKC.bgl
Just delete the whole airportfacilities folder. Yet another screwball from TrafficGlobal from JustSim.
CT
-
You only need to delete AF2_JFKC.bgl in fact you can delete all the AF2 bgls you do not need them, deleting the airportfacilities folder your traffic will drop in the sim.
TG AI use flight plans they show on the panels.
-
Also, I am using UTL. However, I haven't changed anything so I am not sure why that would cause my jetways to be gone. Here is what I have done so far:
- Noticed having DD ORD jetways and FSDT after removing (or at least I thought) DD
- went to remove anything saying DD ORD in SODE files in the %PROGRAMDATA%\12pilot\SODE\DrzewiekiDesign folder
Loaded P3D, still no jetways
- did an uninstall/reinstall of FSDT and ran the updater (jetways still missing)
- went into the GSX customizer and saw that the dropdown for jetways all said "no Jetways"
- changed that at all of the gates to have jetways and reloaded the scenario - still no jetways
- restarted P3D, and still had no jetways at ORD
What could I have deleted by mistake to cause this? This seems like it should be an easy fix considering they were in there when I as still showing both DD and FSDT... Any thoughts?
-
Also, I am using UTL. However, I haven't changed anything so I am not sure why that would cause my jetways to be gone. Here is what I have done so far:
- Noticed having DD ORD jetways and FSDT after removing (or at least I thought) DD
- went to remove anything saying DD ORD in SODE files in the %PROGRAMDATA%\12pilot\SODE\DrzewiekiDesign folder
Loaded P3D, still no jetways
- did an uninstall/reinstall of FSDT and ran the updater (jetways still missing)
- went into the GSX customizer and saw that the dropdown for jetways all said "no Jetways"
- changed that at all of the gates to have jetways and reloaded the scenario - still no jetways
- restarted P3D, and still had no jetways at ORD
What could I have deleted by mistake to cause this? This seems like it should be an easy fix considering they were in there when I as still showing both DD and FSDT... Any thoughts?
As per Umberto's post above what afcad is referenced in the GSX customization ?
-
Also, I am using UTL. However, I haven't changed anything so I am not sure why that would cause my jetways to be gone. Here is what I have done so far:
- Noticed having DD ORD jetways and FSDT after removing (or at least I thought) DD
- went to remove anything saying DD ORD in SODE files in the %PROGRAMDATA%\12pilot\SODE\DrzewiekiDesign folder
Loaded P3D, still no jetways
- did an uninstall/reinstall of FSDT and ran the updater (jetways still missing)
- went into the GSX customizer and saw that the dropdown for jetways all said "no Jetways"
- changed that at all of the gates to have jetways and reloaded the scenario - still no jetways
- restarted P3D, and still had no jetways at ORD
What could I have deleted by mistake to cause this? This seems like it should be an easy fix considering they were in there when I as still showing both DD and FSDT... Any thoughts?
As per Umberto's post above what afcad is referenced in the GSX customization ?
I can report back tonight. What should it be and what should I be looking for?
-
I think I have the problem solved, but not sure how to resolve or what to resolve it to. It looks like in the customizer, my AFCAD reads as follows:
c:\program file\Lockheed martin\Prepared3d v4\addon scenery\Chicago X\scenery\KORD_ade.bgl
I assume this is wrong so would someone be able to tell me what I need to switch this to and how to do it? I've never messed around with AFCAD's. Thanks for the help!
-
I deleted and backed up all of the files in the folder that gsx was saying my afcad was and bingo, that solved the problem. The one weird thing that I noticed and I’m not sure if it is related is that now in fslabs, I don’t have and flight attendant or safety demonstration. Oh well, ORD looks great!!
-
Just reread your post the Addon Scenery folder in P3D is DD Chicago scenery not the airport.
PS try this start P3D go into scenery at the setup screen untick DD Chicago click ok the scenery cache will rebuild without DD.
-
Wouldn't that delete the City? I flew at night and took off to the west so I couldn't really tell if I removed Chicago City. I want to keep DD City, and have FSDT ORD. Right now FSDT appears in the sim and looks good.