FSDreamTeam forum
Products Support => Louisville KSDF Support FSX/P3D => Topic started by: joshuatrees on January 23, 2018, 06:45:00 pm
-
Hello. Pardon my ignorance, but once I'm at the UPS stands at KSDF on my 757 how do I get the UPS guy's to start unloading the plane? (I have GSX installed that I purchased a while back), all GSX is letting me do is open the UPS doors (when I hit Ctrl F12), I opened the 757 cargo door, but it's not doing anything. Thanks guys.
-
As explained on the manual, there's nothing special you are supposed to do, the cargo stand loading method will happen automatically if ALL of these are true:
- You are parked on one of the UPS Cargo Stand spots:
AND
- You are using a plane with a forward cargo door
AND
- The plane is correctly configured in GSX to have the main cargo door in its proper place
AND
- You have parked in the precise, exact, position for the 757.
If any of these is not happening, the loading will be the same as in every other parking.
-
As explained on the manual, there's nothing special you are supposed to do, the cargo stand loading method will happen automatically if ALL of these are true:
- You are parked on one of the UPS Cargo Stand spots:
AND
- You are using a plane with a forward cargo door
AND
- The plane is correctly configured in GSX to have the main cargo door in its proper place
AND
- You have parked in the precise, exact, position for the 757.
If any of these is not happening, the loading will be the same as in every other parking.
Thank you for the reply, Umberto. I will see if it works for me next time. I'll be sure to consider the following.
-
- You are using a plane with a forward cargo door
what about the 747BCF?
-
what about the 747BCF?
Since it doesn't have a forward cargo door, it cannot use the UPS Cargo Stand. The reason why it can't would be obvious if you tried to align the rear cargo door with the cargo stand: the airplane nose would crash into the building!
In real life, 747 use the areas 9 and 11 on the Apron.