FSDreamTeam forum
Products Support => GSX Support FSX/P3D => Topic started by: mroschk on September 04, 2014, 12:00:05 pm
-
Hello,
i arrived today in LPPT, scenerie from Aerosoft installed in P3Dv2.3.
I get wrong Gates displayed, FollowMe drives not on the yellow line.
Attached the afcad
MR
-
i arrived today in LPPT, scenerie from Aerosoft installed in P3Dv2.3. I get wrong Gates displayed, FollowMe drives not on the yellow line.
First, you should check WHAT AFCAD was in use by GSX, which can be done by opening the scenery customization menu in GSX. Chances are another AFCAD was in use, which would explain the wrong gates displayed.
THis can happen because:
1) You have another AFCAD in conflict
OR
2) The AFCAD that comes with the scenery had a some kind of a problem, so the default (or another available one for the same airport) has been selected by GSX.
-
1. ) The attached is used ??? ??? ??? what a question
2. ) there is no other afcad for LPPT
-
1. ) The attached is used ??? ??? ??? what a question
"What question" ??
You just attached the AFCAD that comes with the scenery, but that's doesn't automatically mean it HAS been used by GSX. And, even if it's used by FSX, that doesn't mean for sure it's the one that GSX is using.
Which is why, I asked to CHECK, in GSX, which AFCAD GSX is using, by opening the scenery customization page, and see the name of the AFCAD used by GSX. If it's not that one, we can THEN try to see why GSX doesn't use the AFCAD that comes with the scenery, and I already indicated two possible reasons.
So, just do what you have been asked, and report back.
If you ALREADY did that, you should have said something like "I already checked the GSX scenery customization page, and the attached AFCAD is the one that GSX is using", but you haven't said that, so I HAD to tell you to check FIRST.
2. ) there is no other afcad for LPPT
No, there IS at least another AFCAD for it, and of course it's the default one, and the whole point of my question was, of course, to check if the default AFCAD was in used, instead of the one the comes with the scenery.
P.S.
I moved the thread in the correct section, because you posted it in the wrong one. The correct section to post support questions about GSX, is the support section. The GSX Backdoor is a place where we discuss upcoming new features.
-
The one i send you is us ed, i checked this before ??? ??? ??? ::) ::) ::)
-
The one i send you is us ed, i checked this before ??? ??? ??? ::) ::) ::)
But you haven't SAID that, which is why I HAD to ask. So, do you confirm that GSX is showing the AF2_LPPT.BGL to be in use, from the folder the scenery is installed into, but you still have the wrong list of parking spots ?
Enable logging in the "Troubleshooting" page under the "GSX - Settings" menu, and post the content of your Couatl.LOG file under %APPDATA%\Virtuali
-
But you haven't SAID that, which is why I HAD to ask. So, do you confirm that GSX is showing the AF2_LPPT.BGL to be in use, from the folder the scenery is installed into, but you still have the wrong list of parking spots ?
YES
I wrote i have checked this.. that must be enought.
------------------------
I have attached some Pictures because you do not beleave me.
Also there is a Picture with a proposel for a "Back to Menu" ( Gate selection Main menu ) which is
easy to add at the End of the Gates List.
Also the Log is attached.
-
I wrote i have checked this.. that must be enought.
No, you haven't. In your first message, you ONLY said:
"Attached the afcad"
To THAT message, I told you to check what AFCAD is in use by GSX, and to that you replied "The attached is used, what a question", when the question obviously had all merit, since NOTHING in your first message indicated that you checked it, let alone if you checked in GSX.
I have attached some Pictures because you do not beleave me.
I can't see anywhere in any of my replies any trace that would indicate I don't "believe you". I just told you to post your Couatl.LOG file, and the whole point of having a Couatl.LOG file in the first place, is to troubleshoot these issues, can't see how this has anything to do with believing.
Also there is a Picture with a proposel for a "Back to Menu" ( Gate selection Main menu ) which is easy to add at the End of the Gates List.
As I've said, many times already, just drop it, because it won't happen, and nobody else ever asked for it.
-
Ther is no Need to say because it is self explained that i checked this bevor i post here ::) ::) ::)
The others dont ask for something because the dont want to have the same discussions with you then me.
The other user have too much fear about to get even any announcements.
It seams you have lost your programmer for new Features.
-
ìTher is no Need to say because it is self explained that i checked this bevor i post here ::) ::) ::)
Wrong, "attached the afcad" is NOT self-explained and, as I've said, it doesn't say that you checked, and it doesn't say you checked in the GSX page, that's why your reply "what a question", was obviously wrong.
The others dont ask for something because the dont want to have the same discussions with you then me. The other user have too much fear about to get even any announcements.
Again, you are mistakenly assuming that what YOU believe, is what other users think. When suggestions make sense, they ARE being added, and it's funny, of all people, YOU would complain about it, since the last feature on the Live Update log has been added following YOUR suggestion!
It seams you have lost your programmierer for new Features.
Then I'll have to prove you wrong, again:
YOU asked to get the indication if a parking has a Jetway in the menu, on August 3rd, at 10:53 PM:
http://www.fsdreamteam.com/forum/index.php/topic,10633.msg82670.html#msg82670
It was added IN ONE HOUR!
http://www.fsdreamteam.com/forum/index.php/topic,10633.msg82676.html#msg82676
And of course, the Live Update log is there to prove you wrong, again:
http://www.fsdreamteam.com/couatl_liveupdate_notes.html
-
In any case, to get back to the topic, I've tested the AFCAD you posted, and of course, no problems whatsoever, see the attached screenshot, which shows the AFCAD in use is the one you attached, and the gates are correct.
Are you sure you have the latest Live Update installed ? If not sure, try to run GSX installer or the Stand-Alone Addon Manager installer again.
-
I have no loss on these discussions
do something in LPPT or not, it is even.
you are right, i am wrong as always..
the question stays here how Long the Deicers will take as one of a lot examples.
but not for me.
bye
-
you post in the meanwhile i wrote here.
Have you no ground Chart from LPPT ??? ??? ??? ??? ??? ??? ???
crazy as always .. you say i am wrong but you have not the Minimum of informations you Need
( same as of the discussion about the Pushback and also the Gate preselection ::) ::) ::) ::) ::) ::) ::) )
-
do something in LPPT or not, it is even.
I don't have your problem.
the question stays here how Long the Deicers will take as one of a lot examples.
When they are done. Do you want them BEFORE they are ?
-
Have you no ground Chart from LPPT ??? ??? ??? ??? ??? ??? ???
Don't understand the question. You send me a screenshot with just 2 gates at terminal A, I posted a screenshot with all gates listed. There's clearly a difference.
crazy as always .. you say i am wrong but you have not the Minimum of informations you Need
( same as of the discussion about the Pushback and also the Gate preselection ::) ::) ::) ::) ::) ::) ::) )
Not understand you, again. I just loaded your AFCAD in FSX, and posted what I see. And added a suggestion to be sure you have everything updated. What this has anything to do with your other suggestions, it's beyond me.
-
Just for you, that also you can understand:
I post this Picture "GSX.jpg ( attached ) IN THE ZIP FILE.
Here you can see for gates starting with "A" the Gates
A 4
A 5
A 6
A 7
A 14
A 16
A 17
A 22
A 23
A 25
A 26
But if you can see in the Chart i also send you before and attached here again as LPPT.PDF
there are Gates starting with A which are 114, 115, 116, 117 ... and so on.
But These are not listed in GSX.
I hope i explained it now enough , so also you canunderstand it ::) ::) ::) ::) ::) ::) ??? ??? ??? ??? ??? ???
-
But if you can see in the Chart i also send you before and attached here again as LPPT.PDF
there are Gates starting with A which are 114, 115, 116, 117 ... and so on.
But These are not listed in GSX.
So, are you saying that is *GSX* that is having a problem, when in fact is Aerosoft that hasn't included all the parking in their own AFCAD ?
I thought you were reporting more parkings in the GSX scenery customization page, compared to the GSX parking selection menu! I couldn't possibly imagine you would report something as absurd as this!
Have you tried opening the Aerosoft AFCAD (for example with ADE ), and checked if those parking were there in the first place ? I did it now and, of course, they are NOT there. GSX can't obviously show parkings that are not even there in the scenery.
Find the attached screenshot taken from ADE opening the file you sent, the parkings you report to be "missing from GSX", are NOT in the AFCAD!
Problem solved, as (of course) not being a GSX problem to begin with.
-
To mroschk:
Your attitude towards Umberto, who is only trying to help you, is an absolute disgrace.
-
To mroschk:
Your attitude towards Umberto, who is only trying to help you, is an absolute disgrace.
thats because my sugestions are rejected.( except one with the /J for the Jetways which dosent
Work on all airports )
This is a BIG BIG improvement
-
thats because my sugestions are rejected.( except one with the /J for the Jetways which dosent
Work on all airports )
We don't agree to all your suggestion and clearly explained why, that one made sense, and of course it HAS been added, and it WORKS at all airports, provided (of course) the airport either has proper FSX jetways, or (if the scenery has fake jetways) you customized it to indicate where they are.
You are probably confusing the *initial* release, the one released ONE HOUR after you suggestion, it had a bug that YOU reported it here:
http://www.fsdreamteam.com/forum/index.php/topic,10725.0.html
And it was fixed, following your report, about 8 hours later. If you still have problems with it now, clearly indicate where it happens, and it will be checked again, as usual.
-
as always ...
You are right, i am wrong ...
Lets wait for any improvement
-
To mroschk:
Your attitude towards Umberto, who is only trying to help you, is an absolute disgrace.
thats because my sugestions are rejected.( except one with the /J for the Jetways which dosent
Work on all airports )
This is a BIG BIG improvement
Apart from your attitude, your arrogance is also beyond belief!
-
Lets wait for any improvement
In your attitude ? Lost hope...