Issue with Aerosoft Oslo v2 after update 1.03

[WebMaximus]

After installing the latest update (1.03) for Aerosoft Oslo v2 GSX no longer works but gives an error message saying there are no parkings available.

I found the problem but I'm not sure how to fix it. Looking at the screenshot below you can see that GSX uses the wrong BGL. I'm not 100% because there are lots of BGL found in that folder but I think the correct BGL would be ENGM_AFX.bgl

Is there any way for me to manually change what BGL GSX will use for a certain airport or is some fix/update required either from you or Aerosoft?

https://dl.dropboxusercontent.com/u/94801887/Oslo%202%20v%201.03%20GSX%20issue.JPG

[virtuali]

Is there any way for me to manually change what BGL GSX will use for a certain airport or is some fix/update required either from you or Aerosoft?

Try to use the function to disable a specific airport, ENG1 in this case, the disable_on_airports parameter explained at Page 19 of the GSX manual.

If that doesn't work, you might try moving the real AFCAD file into a separate folder ( doesn't Aerosoft use a separate folder with all their AFCADs ? That could be a good location ), and be sure you give it an higher priority on the Scenery Library.

[WebMaximus]

Tried both your suggestions but unfortunately none of them worked.

When I tried disabling ENG1 via coutladdons.ini as described in the GSX doc I received a message GSX has been disabled for the airport and when I tried moving the correct BGL (or at least what I guess is the correct BGL, have to verify this with Aerosoft) into a separate folder and then adding this new folder in FSX scenery library above the original entry for this addon airport I was back receiving the error that no parkings were available at this airport.

To answer your question where Aerosoft store their afcads I think normally they are found under ...FSX\aerosoft\name of airport\Scenery. Below is a screenshot showing the Scenery folder for Oslo v2

https://dl.dropboxusercontent.com/u/94801887/Oslo%202%20v%201.03%20Scenery%20folder.JPG

[virtuali]

when I tried moving the correct BGL (or at least what I guess is the correct BGL, have to verify this with Aerosoft) into a separate folder and then adding this new folder in FSX scenery library above the original entry for this addon airport I was back receiving the error that no parkings were available at this airport.

You should also exit from FSX, restart it, and let GSX update the scenery cache.

To answer your question where Aerosoft store their afcads I think normally they are found under ...FSX\aerosoft\name of airport\Scenery. Below is a screenshot showing the Scenery folder for Oslo v2

I'm fairly sure they also use a separate folder for all their AFCADs from different products, I think it's Aerosoft\AFD or something like that.

[WebMaximus]

Just did another test to make sure I did everything exactly as you suggested but still same thing I'm afraid...receiving the message no parking are available as soon as I press the hotkey for GSX.

You're correct regarding the AFD folder but it didn't hold anything related to ENGM.

[virtuali]

Just did another test to make sure I did everything exactly as you suggested but still same thing I'm afraid...receiving the message no parking are available as soon as I press the hotkey for GSX.

If you move the .BGL to a separate folder on an higher layer, you can't also use the disable_on_airports method.

[WebMaximus]

I haven't been using the two different methods at the same time.

[virtuali]

I haven't been using the two different methods at the same time.

Then it will work with the method of moving the .BGL on higher layer, and be sure you restart FSX and let GSX update its cache. To force a cache update, remove the following folder:

C:\ProgramData\Microsoft\FSX\SceneryIndexes
C:\ProgramData\Virtuali\Couatl

You are not new having problems with updating the Scenery Library:

http://www.fsdreamteam.com/forum/index.php/topic,9807.msg77209.html#msg77209

It's possible this AFCAD has an error, but it also possible ANOTHER AFCAD has an error, which doesn't allow the cache rebuild to be completed.

Also, what the GSX scenery editor is saying now about the AFCAD being in use ?

And of course, you can also check your Couatl.LOG file, as I've explained in the other message from you, perhaps there's some diagnostic about this.

[WebMaximus]

None of the two methods you've mentioned have worked and I already cleared the airport DB cache by deleting the files you mention.

A temporary fix was presented over in Aerosoft's support forum, to remove the flatten BGL incorrectly used by GSX. Will have to wait for a comment from the developer though how removing this file will affect the scenery since that file obviously is there for a reason.

[WebMaximus]

Aerosoft released a new Alpha_Flatten.bgl file and with the new file GSX works just fine again 

The fix can be found here ->

http://forum.aerosoft.com/index.php?/topic/78777-issues-with-fsdt-gsx-after-oslo-v2-103-update/?p=562367

[virtuali]

Aerosoft released a new Alpha_Flatten.bgl file and with the new file GSX works just fine again

I still don't consider the thing to be properly solved. As I've said, moving the normal AFCAD on a separate layer with an higher priority SHOULD have fixed it, because GSX will use the AFCAD with the highest priority.

That's why I've asked if, after moving the AFCAD to a separate folder, the GSX scenery editor still reported the wrong one, and why I've asked to have a look at your Couatl.LOG file, perhaps there was something else.

[WebMaximus]

Well, I'm good with having the problem solved but if I find the time for it I'll do another test with the old file and let you know the result.

When it comes to this specific issue something was clearly wrong and not only at my end because other people noticed the same problem. However I might have some other issues because I've noticed the GSX airport cache doesn't update itself anymore after changes done to the scenery library. Now I have to always manually delete the cache files to force an update.

Do you have any tips on how I could troubleshoot that type of issue, you said something about I might have a bad/corrupted afcad but how could I find that? All my addon airports do work fine though, wouldn't I also see other problems with an airport with a corrupt afcad file?

[virtuali]

Do you have any tips on how I could troubleshoot that type of issue, you said something about I might have a bad/corrupted afcad but how could I find that?

That was just an hypothesis and, as I've said, the Couatl.LOG file might have some hints about this.

[WebMaximus]

Haven't had the time to do any more testing with Oslo yet but this is what my Couatl.log file looks like and as you can see it seems there is a problem with a UK2000 scenery BGL (egbb_afx_UK2xTRM.BGL) but I've verified the file does exist and the scenery works just fine so not sure why the log reports the file as missing?

Code: [Select]

couatl v2.0 (build 2356)
log started on Fri Jan 24 14:35:03 2014

connecting to SimConnect...
connected to FSX
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 20 AddOn(s)
Loading addon OHareX
Addon OHareX not installed or missing one or more files, skipping
Loading addon KDFW
Addon KDFW not installed or missing one or more files, skipping
Loading addon LSGG
Addon LSGG loaded
Loading addon GSX
Initializing audio...
Available devices:
  Generic Software on Speakers (Realtek High Definition Audio) (47656e6572696320536f667477617265206f6e20537065616b65727320285265616c74656b204869676820446566696e6974696f6e20417564696f29)
  Generic Software on Line 2 (Virtual Audio Cable) (47656e6572696320536f667477617265206f6e204c696e65203220285669727475616c20417564696f204361626c6529)
  Generic Software on Speakers (USB PnP Sound Device) (47656e6572696320536f667477617265206f6e20537065616b657273202855534220506e5020536f756e642044657669636529)
  Generic Software on Realtek HDMI Output (Realtek High Definition Audio) (47656e6572696320536f667477617265206f6e205265616c74656b2048444d49204f757470757420285265616c74656b204869676820446566696e6974696f6e20417564696f29)
  Generic Software on Speakers (Logitech Wireless Headset) (47656e6572696320536f667477617265206f6e20537065616b65727320284c6f67697465636820576972656c657373204865616473657429)
  Generic Software on Line 1 (Virtual Audio Cable) (47656e6572696320536f667477617265206f6e204c696e65203120285669727475616c20417564696f204361626c6529)
Created OpenAL device: Generic Software on Speakers (Realtek High Definition Audio)

Device info:
Major version: 1
Minor version: 1
Frequency: 44100
Refresh: 40
Sync: 0
Mono sources: 255
Stereo sources: 1
Extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_EFX

Context info:
Vendor: Creative Labs Inc.
Version: 1.1
Renderer: Software
Extensions: EAX EAX2.0 EAX3.0 EAX4.0 EAX5.0 EAX3.0EMULATED EAX4.0EMULATED AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE

Using EFX 1.0 extension, with 1 auxiliary send(s)
Using EAX reverb
Current directory is F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X
Looking for scenery.cfg in C:/ProgramData/Microsoft/FSX/scenery.cfg
  using Scenery/World/scenery (layer 1)
  using Scenery/BASE/scenery (layer 2)
  using Scenery/0000/scenery (layer 3)
  using Scenery/0001/scenery (layer 4)
  using Scenery/0002/scenery (layer 5)
  using Scenery/0003/scenery (layer 6)
  using Scenery/0004/scenery (layer 7)
  using Scenery/0005/scenery (layer 8)
  using Scenery/0006/scenery (layer 9)
  using Scenery/0007/scenery (layer 10)
  using Scenery/0100/scenery (layer 11)
  using Scenery/0101/scenery (layer 12)
  using Scenery/0102/scenery (layer 13)
  using Scenery/0103/scenery (layer 14)
  using Scenery/0104/scenery (layer 15)
  using Scenery/0105/scenery (layer 16)
  using Scenery/0106/scenery (layer 17)
  using Scenery/0107/scenery (layer 18)
  using Scenery/0200/scenery (layer 19)
  using Scenery/0201/scenery (layer 20)
  using Scenery/0202/scenery (layer 21)
  using Scenery/0203/scenery (layer 22)
  using Scenery/0204/scenery (layer 23)
  using Scenery/0205/scenery (layer 24)
  using Scenery/0206/scenery (layer 25)
  using Scenery/0207/scenery (layer 26)
  using Scenery/0300/scenery (layer 27)
  using Scenery/0301/scenery (layer 28)
  using Scenery/0302/scenery (layer 29)
  using Scenery/0303/scenery (layer 30)
  using Scenery/0304/scenery (layer 31)
  using Scenery/0305/scenery (layer 32)
  using Scenery/0306/scenery (layer 33)
  using Scenery/0307/scenery (layer 34)
  using Scenery/0400/scenery (layer 35)
  using Scenery/0401/scenery (layer 36)
  using Scenery/0402/scenery (layer 37)
  using Scenery/0403/scenery (layer 38)
  using Scenery/0404/scenery (layer 39)
  using Scenery/0405/scenery (layer 40)
  using Scenery/0406/scenery (layer 41)
  using Scenery/0407/scenery (layer 42)
  using Scenery/0500/scenery (layer 43)
  using Scenery/0501/scenery (layer 44)
  using Scenery/0502/scenery (layer 45)
  using Scenery/0503/scenery (layer 46)
  using Scenery/0504/scenery (layer 47)
  using Scenery/0505/scenery (layer 48)
  using Scenery/0506/scenery (layer 49)
  using Scenery/0507/scenery (layer 50)
  using Scenery/0600/scenery (layer 51)
  using Scenery/0601/scenery (layer 52)
  using Scenery/0602/scenery (layer 53)
  using Scenery/0603/scenery (layer 54)
  using Scenery/0604/scenery (layer 55)
  using Scenery/0605/scenery (layer 56)
  using Scenery/0606/scenery (layer 57)
  using Scenery/0607/scenery (layer 58)
  using Scenery/0700/scenery (layer 59)
  using Scenery/0701/scenery (layer 60)
  using Scenery/0702/scenery (layer 61)
  using Scenery/0703/scenery (layer 62)
  using Scenery/0704/scenery (layer 63)
  using Scenery/0705/scenery (layer 64)
  using Scenery/0706/scenery (layer 65)
  using Scenery/0707/scenery (layer 66)
  using Scenery/0800/scenery (layer 67)
  using Scenery/0801/scenery (layer 68)
  using Scenery/0802/scenery (layer 69)
  using Scenery/0803/scenery (layer 70)
  using Scenery/0804/scenery (layer 71)
  using Scenery/0805/scenery (layer 72)
  using Scenery/0806/scenery (layer 73)
  using Scenery/0807/scenery (layer 74)
  using Scenery/0900/scenery (layer 75)
  using Scenery/0901/scenery (layer 76)
  using Scenery/0902/scenery (layer 77)
  using Scenery/0903/scenery (layer 78)
  using Scenery/0904/scenery (layer 79)
  using Scenery/0905/scenery (layer 80)
  using Scenery/0906/scenery (layer 81)
  using Scenery/0907/scenery (layer 82)
  using Scenery/1000/scenery (layer 83)
  using Scenery/1001/scenery (layer 84)
  using Scenery/1002/scenery (layer 85)
  using Scenery/1003/scenery (layer 86)
  using Scenery/1004/scenery (layer 87)
  using Scenery/1005/scenery (layer 88)
  using Scenery/1006/scenery (layer 89)
  using Scenery/1007/scenery (layer 90)
  using Scenery/1100/scenery (layer 91)
  using Scenery/1101/scenery (layer 92)
  using Scenery/1102/scenery (layer 93)
  using Scenery/1103/scenery (layer 94)
  using Scenery/1104/scenery (layer 95)
  using Scenery/1105/scenery (layer 96)
  using Scenery/1106/scenery (layer 97)
  using Scenery/1107/scenery (layer 98)
  using F:/fsgux/eur/scenery (layer 99)
  using F:/fsgux/afr/scenery (layer 100)
  using F:/fsgux/LocalMeshes/scenery (layer 101)
  using Scenery/AFRI/scenery (layer 102)
  using Scenery/ASIA/scenery (layer 103)
  using Scenery/AUST/scenery (layer 104)
  using Scenery/EURE/scenery (layer 105)
  using Scenery/EURW/scenery (layer 106)
  using Scenery/NAMC/scenery (layer 107)
  using Scenery/NAME/scenery (layer 108)
  using Scenery/NAMW/scenery (layer 109)
  using Scenery/OCEN/scenery (layer 110)
  using Scenery/SAME/scenery (layer 111)
  using Scenery/Cities/Oshkosh/scenery (layer 112)
  using Scenery/Cities/StMaarten/scenery (layer 113)
  using Scenery/Cities/Rio/scenery (layer 114)
  using Scenery/Cities/LasVegas/scenery (layer 115)
  using Scenery/Global/scenery (layer 116)
  using Scenery/Props/scenery (layer 117)
  using Addon Scenery/scenery (layer 118)
  using Scenery/UtExcl/scenery (layer 119)
  using Scenery/UtEurLights/scenery (layer 120)
  using Scenery/UtLcVeg/scenery (layer 121)
  using SceneryTech/Landclass/EU/scenery (layer 122)
  using Scenery/UtLcCity/scenery (layer 123)
  using Scenery/UtLcCustEur/scenery (layer 124)
  using Scenery/UtEurRoad/scenery (layer 125)
  using Scenery/UtEurRail/scenery (layer 126)
  using Scenery/UtEurWater/scenery (layer 127)
  using Scenery/UtEurStream/scenery (layer 128)
  using Scenery/UtEurGP/scenery (layer 129)
  using Scenery/UtObjRepo/scenery (layer 130)
  using Scenery/UtWc/scenery (layer 131)
  using Scenery/UtEurAirports/scenery (layer 132)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/SimMarket/Malta Intl Airport v2/scenery (layer 137)
  using Eiresim Alicante Ultimate/LEAL/scenery (layer 138)
  using Eiresim Dublin 2009/EIDW_LC/scenery (layer 139)
  using Eiresim Dublin 2009/EIDW/scenery (layer 140)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/Addon Scenery/FlyTampa-Athens_LC/scenery (layer 141)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/Addon Scenery/FlyTampa-Athens/scenery (layer 142)
  using FsDreamTeam/LSGG/scenery (layer 143)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/SimMarket/EKCH Copenhagen Kastrup X/EKCH-TERRAIN/scenery (layer 144)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/SimMarket/EKCH Copenhagen Kastrup X/EKCH-X/scenery (layer 145)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Common Library/scenery (layer 146)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Birmingham Xtreme/scenery (layer 147)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Heathrow Xtreme/scenery (layer 148)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Manchester Xtreme/scenery (layer 149)
  using aerosoft/Amsterdam Schiphol X/scenery (layer 150)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Antalya X/scenery (layer 151)
  using Aerosoft/Mega Airport Barcelona X/scenery (layer 152)
  using aerosoft/Mega Airport Duesseldorf/EDDL_2013_SC/scenery (layer 153)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Faro X/scenery (layer 154)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Mega Airport Frankfurt_LC/scenery (layer 155)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Mega Airport Frankfurt/scenery (layer 156)
  using aerosoft/German Airports 3/scenery (layer 157)
  using aerosoft/Mega Airport Helsinki/scenery (layer 158)
  using aerosoft/Heraklion X/Heraklion X_3_LC/scenery (layer 159)
  using aerosoft/Heraklion X/Heraklion X_2_Scenery/scenery (layer 160)
  using aerosoft/Heraklion X/Heraklion X_1/scenery (layer 161)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Larnaca X/scenery (layer 162)
  using Aerosoft/Menorca X Ground/scenery (layer 163)
  using Aerosoft/Menorca X SC/scenery (layer 164)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Nice Cote dAzur X/scenery (layer 165)
  using Aerosoft/Mallorca X Ground/scenery (layer 166)
  using Aerosoft/Mallorca X SC/scenery (layer 167)
  using Aerosoft/Mega Airport Paris CDG Ground/scenery (layer 168)
  using Aerosoft/Mega Airport Paris CDG SC/scenery (layer 169)
  using aerosoft/FSDG - Sharm El Sheik 2012/scenery (layer 170)
  using Aerosoft/Santorini X/scenery (layer 171)
  using Aerosoft/Arlanda X/scenery (layer 172)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Vaernes X/VaernesX_D/scenery (layer 173)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Vaernes X/VaernesX_C/scenery (layer 174)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Vaernes X/VaernesX_B/scenery (layer 175)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Vaernes X/VaernesX_A/scenery (layer 176)
  using aerosoft/Mega Airport Zurich 2012/scenery (layer 177)
  using Aerosoft/Mega Airport Brussels X/scenery (layer 178)
  using F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/aerosoft/Afd/scenery (layer 184)
  using Aerosoft/AES/scenery (layer 185)
  using ORBX/FTX_AU/FTXAA_ORBXLIBS/scenery (layer 133)
  using ORBX/FTX_OLC/OLC_AA/scenery (layer 134)
  using ORBX/FTX_OLC/OLC_NA1/scenery (layer 135)
  using ORBX/FTX_OLC/OLC_EU1/scenery (layer 136)
  using aerosoft/Stavanger X/scenery (layer 179)
  using aerosoft/Mega Airport Oslo 2.0/scenery (layer 180)
  using aerosoft/Thessaloniki X/Thessaloniki X_3_LC/scenery (layer 181)
  using aerosoft/Thessaloniki X/Thessaloniki X_2_Scenery/scenery (layer 182)
  using aerosoft/Thessaloniki X/Thessaloniki X_1/scenery (layer 183)
Airport cache loaded
Addon GSX loaded
Loading addon HAWAII1
Addon HAWAII1 not installed or missing one or more files, skipping
Loading addon HAWAII2
Addon HAWAII2 not installed or missing one or more files, skipping
Loading addon PHNL
Addon PHNL not installed or missing one or more files, skipping
Loading addon JFK
Addon JFK not installed or missing one or more files, skipping
Loading addon JFK2
Addon JFK2 not installed or missing one or more files, skipping
Loading addon KFLL
Addon KFLL not installed or missing one or more files, skipping
Loading addon KLAS
Addon KLAS not installed or missing one or more files, skipping
Loading addon KLAX
Addon KLAX not installed or missing one or more files, skipping
Loading addon ParkMe
Addon ParkMe loaded
Loading addon CYVR
Addon CYVR not installed or missing one or more files, skipping
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon ZurichX
Addon ZurichX not installed or missing one or more files, skipping
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon KSFO
Addon KSFO not installed or missing one or more files, skipping
Loading addon KPHX
Addon KPHX not installed or missing one or more files, skipping
Loading addon KIAD
Addon KIAD not installed or missing one or more files, skipping
Starting system monitors
Current locale is Swedish_Sweden.1252
SharedMemInterface connected
Loading aircraft data from Airplanes\PMDG 737-800NGX WL
intelliscene.cfg provides aircraft data with priority 1
aircraftDb.py provides aircraft data with priority 2
Using aircraft data from aircraftDb.py
Found gsx.cfg file at C:\Users\Richard\AppData\Roaming\Virtuali\Airplanes\PMDG 737-800NGX WL\gsx.cfg
System error while accessing file F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Birmingham Xtreme/scenery/egbb_afx_UK2xTRM.BGL: CreateFile failed: The system cannot find the file specified (system:2)
System error while accessing file F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Birmingham Xtreme/scenery/egbb_afx_UK2xTRM.BGL: CreateFile failed: The system cannot find the file specified (system:2)
System error while accessing file F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X/UK2000 scenery/UK2000 Birmingham Xtreme/scenery/egbb_afx_UK2xTRM.BGL: CreateFile failed: The system cannot find the file specified (system:2)
SharedMemInterface created
disconnected from SimConnect.


[WebMaximus]

So I now performed another test and this is what I did step by step

- deleted Couatl.log and Couatl.err from %appdata%\Virtuali to make sure I would have fresh log files
- manually deleted GSX airport cache
- uninstalled the Oslo scenery and then started FSX to let it update the scenery library
- installed the Oslo scenery and again started FSX to let it update the scenery library
- started FSX at gate 42 at Oslo and then tried starting GSX and got the same error about no parkings available
- exited FSX and moved the correct afcad file to it's own folder and included this folder in the scenery library above the original Oslo 2
- again manually deleted GSX airport cache (since GSX for some reason no longer updates the airport cache automatically)
- started FSX and GSX and same error again about no parkings available
- checked what BGL GSX was using and noticed the same (Alpha_Flatten.bgl) file was still in use
- went to check the log files under %appdata%\Virtuali but to my surprise no new log files had been created
- removed the new folder from the scenery library
- copied the correct afcad back to it's original location under ...FSX\aerosoft\Mega Airport Oslo 2.0\Scenery
- replaced the original Alpha_Flatten.bgl with the fixed one provided by the developer of the Oslo scenery
- started FSX and then GSX and all was fine

Still no log files found though for GSX under %appdata%\Virtuali and still GSX won't rebuild it's airport cache automatically.