« previous next »
Pages: [1] 2 3 4

Author Topic: Texture ground Flickering **SOLVED**  (Read 64673 times)

nevetrek

  • Jr. Member
  • **
  • Posts: 56
Texture ground Flickering **SOLVED**
« on: January 05, 2013, 03:05:02 pm »
Hi

In my test I have 1 probleme ... the ground textures are flickering !!!
I have a Flatten issues... ???
I look for find an old af2_cyvr file remain on my FSX but not find ...
I activated Orbx and disable it ... without différence on this problem ...  
I think have an elévation probleme !  :-\
When the trial time are end, I see on the ground the hole with a little différence altitude with the ground and the runway/taxiway ... :-\ :-\

Some other are the same ????
Do you have an little way for find where is the problem ?
Thank

http://www7.pic-upload.de/05.01.13/zha77n1sx774.jpg
http://www10.pic-upload.de/05.01.13/cypf4cnbkr1h.jpg
« Last Edit: December 07, 2013, 11:27:58 am by virtuali »
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 52017
    • VIRTUALI Sagl
Re: Texture ground Flickering
« Reply #1 on: January 05, 2013, 03:27:17 pm »
First, be sure you use the Mesh complexity settings as suggested on the CYVR manual, which is 5m/pixel resolution and 100 Complexity.

If that doesn't fix it, and you are sure you don't have another AFCAD from another product in conflict (use the free FSX Airport Scanner to search for AFCAD duplicates), the problem is likely caused by another 3rd party mesh, in this case you have to disable it, because meshes will always display first depending on their resolution, even if they are on a lower level.
Logged

nevetrek

  • Jr. Member
  • **
  • Posts: 56
Re: Texture ground Flickering
« Reply #2 on: January 05, 2013, 04:30:38 pm »
Thanks for very speed answer
Yes, the settings mesh are good and conform to your manual, 5 and 100
I use the scan, but not find another afcad ... :-\
Do you have some idea whats the default ellévation file in FSX for see if this file are an original ...
( in the scenery folder with folder name 0000, 0001, 002 etc ... end by the folder World ) Witch folder are the CYVR by default ?

I'm despited ... I look at for find a solution all the days, tried all solution ... disable all my scenery except Cyvr ... patch Orbx ...but not run corectly, I have every time this elévation problem, hole, on some area from the airport  :'( :'( :'(
Yes, the symptom are the same with 3rd party or duplicated afcad ... except ...there is not 2X afcad and not 3rd party in this area !
 
« Last Edit: January 05, 2013, 06:25:33 pm by nevetrek »
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 52017
    • VIRTUALI Sagl
Re: Texture ground Flickering
« Reply #3 on: January 05, 2013, 07:12:38 pm »
Quote from: nevetrek on January 05, 2013, 04:30:38 pm
I use the scan, but not find another afcad ... :-\

Then the problem is likely caused by a 3rd party mesh instead.

Quote
Do you have some idea whats the default ellévation file in FSX for see if this file are an original ...( in the scenery folder with folder name 0000, 0001, 002 etc ... end by the folder World )

It's unlikely some addon has modified the default files, it's most likely you have a separate .bgl somewhere else. Unfortunately, there's no similar utility like the airport scanner, to look for mesh scenery, you'll have to find it manually.
Logged

nevetrek

  • Jr. Member
  • **
  • Posts: 56
Re: Texture ground Flickering
« Reply #4 on: January 05, 2013, 07:26:03 pm »
Quote from: virtuali on January 05, 2013, 07:12:38 pm

Then the problem is likely caused by a 3rd party mesh instead.

It's unlikely some addon has modified the default files, it's most likely you have a separate .bgl somewhere else. Unfortunately, there's no similar utility like the airport scanner, to look for mesh scenery, you'll have to find it manually.

3rd party or mesh ... yes I not doubt ... but where ??? I dissable all my scenery in library ! :-[
I looking the file with ADE, I find the original FSX file, In ( scenery /0101 base/ scenery/APX15140.bgl )the original altitude are 4,267 meter ... With the ADE scan, I not find another BGL file with CYVR référence ... ( except your files )
Yes, one extra Mesh are possible ...but where ...I think the search are very long  :'(
But for moment, I just disable the original file APX15140.bgl, Is not again perfect, I have again some flickering but less  and it is playable...
Chers.
Logged

Chris

  • Newbie
  • *
  • Posts: 28
Re: Texture ground Flickering
« Reply #5 on: January 05, 2013, 07:36:40 pm »
I have a flickering problem too.
Difficult to make a screenshot maybe you could take a look at the video.
www.creppel.de/Bilder/cyvr.mp4
What can cause this?
Logged

nevetrek

  • Jr. Member
  • **
  • Posts: 56
Re: Texture ground Flickering
« Reply #6 on: January 05, 2013, 08:00:16 pm »
I search also ... I see your video, that's in the same style for me :-\
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 52017
    • VIRTUALI Sagl
Re: Texture ground Flickering
« Reply #7 on: January 05, 2013, 09:01:53 pm »
Quote from: Chris on January 05, 2013, 07:36:40 pm
What can cause this?

All possible causes are already discussed in this thread.

It's either another AFCAD or a 3rd party mesh, assuming you set your settings as suggested on them manual, which was also already discussed in this thread.
Logged

BillS511

  • Jr. Member
  • **
  • Posts: 54
Re: Texture ground Flickering
« Reply #8 on: January 05, 2013, 09:29:22 pm »
This happens only in aircraft view or top down view for me. Cockpit and spot view are fine. Using recommended scenery settings. Found no addtional AFCAD's.
« Last Edit: January 05, 2013, 09:30:59 pm by Bill511 »
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 52017
    • VIRTUALI Sagl
Re: Texture ground Flickering
« Reply #9 on: January 05, 2013, 09:35:45 pm »
In Top Down view, you should expect some flickering. It's important you don't have it in Spot view or in the VC, where it counts...
Logged

BillS511

  • Jr. Member
  • **
  • Posts: 54
Re: Texture ground Flickering
« Reply #10 on: January 05, 2013, 09:51:14 pm »
Quote from: virtuali on January 05, 2013, 09:35:45 pm
It's important you don't have it in Spot view or in the VC, where it counts...
My thought exactly. Otherwise the scenery looks great. Including the shadows.
Logged

nevetrek

  • Jr. Member
  • **
  • Posts: 56
Re: Texture ground Flickering
« Reply #11 on: January 05, 2013, 11:13:50 pm »
That's my setting vieux with your add-on manager Do you think some parameter are not good ???
http://www7.pic-upload.de/05.01.13/kmr3i8txpz3d.jpg
« Last Edit: January 05, 2013, 11:15:47 pm by virtuali »
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 52017
    • VIRTUALI Sagl
Re: Texture ground Flickering
« Reply #12 on: January 05, 2013, 11:17:07 pm »
If you are seeing flickering in VC or Spot view (in Top Down view is to be expected), it's either another AFCAD or a 3rd party mesh. The only settings that could affect this, are those suggested on the manual about the Mesh settings.
Logged

nevetrek

  • Jr. Member
  • **
  • Posts: 56
Re: Texture ground Flickering
« Reply #13 on: January 06, 2013, 12:43:11 am »
Also, since installing CYVR, now my GSX not run :-\ when I apply by ctrl shift F12 ... the menu not came ...
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 52017
    • VIRTUALI Sagl
Re: Texture ground Flickering
« Reply #14 on: January 06, 2013, 01:02:17 am »
Quote from: nevetrek on January 06, 2013, 12:43:11 am
Also, since installing CYVR, now my GSX not run :-\ when I apply by ctrl shift F12 ... the menu not came ...

Already discussed here:

http://www.fsdreamteam.com/forum/index.php?topic=7872.0

try to run the installer again now.
Logged
Pages: [1] 2 3 4
« previous next »