Author Topic: GSX not working **SOLVED**  (Read 15066 times)

spinker

  • Jr. Member
  • **
  • Posts: 68
GSX not working **SOLVED**
« on: September 26, 2012, 06:15:56 pm »
Hello,

GSX is not working in FSX.
Couatl is still in addon manger.

Need some help to get started again please.

Thank you,

Larry
« Last Edit: September 29, 2012, 01:08:31 am by virtuali »

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51238
    • VIRTUALI Sagl
Re: GSX not working
« Reply #1 on: September 26, 2012, 06:46:04 pm »
Define "not working", please.

First, have you installed the FULL GSX installer, and not just the Addon Manager ?

After you are sure having done that, do you have the GSX sub menus under the "Couatl powered products" menu ?

If yes, check the "Change key assignment" menu, and check the key assigned to GSX. Do you have another addon using that key (like IVAP, which by default use the same CTRL+F12 key as GSX) ? If yes, you need to change the key assignment for GSX or in the other addon.

spinker

  • Jr. Member
  • **
  • Posts: 68
Re: GSX not working
« Reply #2 on: September 26, 2012, 08:02:01 pm »
Not working = If I hit CTRL+F12 with brakes on I do not get the GSX menu.

GSX has been running quite well for a long time. Something must have caused it to stop. I recently ran CCleaner.

I have in the past installed the full GSX as well as the addon manager.

I do have the sub menus under the  "Couatl powered products".

CTRL+F12 is dedicated to GSX.

I do have a copy of gsx_fsx_setup.exe dated 5/13/2012.\

Larry

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: GSX not working
« Reply #3 on: September 26, 2012, 09:00:27 pm »
Hello,

I just headed to this forum here to look about an error I have since today as I wanted to start a flight:
and the first thread here is about the same error!


It's exactly the same here: I can't open the GSX window in FSX with Ctrl+F12 (or any other combination)
Of course it has worked - don't know when I have used GSX the last time, but sure in the last 7 days!

I have not run CCCleaner or sth like that!

I have the Addon manager and Couatl Entry in the FSX menu.
And I can open all submenues in GSX (settings, aircraft manager etc) and also the Addon manager of course.



I have tried now several reinstalls (downloaded the installer from FSD Site), also deactivate and reactivate the key.
Restarting Couatl also does not help.

So, I run out of ideas now.
I have reinstalled my FSX lately, but GSX was working since then as I said.
Otherwise I can't say that I have installed or made sth unusual the last days...

Günter
p.s. many thanks for adding the "nose left-right" on GSX :)

p.p.s: what I have also tried is to delete the [trusted] line in the FSX.cfg -- no success. Was just an idea.
« Last Edit: September 26, 2012, 09:05:19 pm by Guenseli »

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51238
    • VIRTUALI Sagl
Re: GSX not working
« Reply #4 on: September 26, 2012, 09:48:17 pm »
You can also activate a log, to see what's happening: open the Notepad and type the following on a new blank file:

logFile=couatl.log

(please note logFile is written beginning with a lower case l and a capital F )

Save the file as couatl.ini in the FSX\fsdreamteam\couatl folder, so it stays at the same level of the couatl.exe. Then go in FSX, then when it's done loading a scenery and ready to fly, exit and post the content of the Couatl.LOG file that should have been created inside FSX\fsdreamteam\couatl

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: GSX not working
« Reply #5 on: September 27, 2012, 12:39:56 am »
Hello Umberto,

here is my log of the last flight.
I have deleted all the scenery library entries to make the post here not too long.
They do all show nothing special.


Code: [Select]
couatl v2.0 (build 2315)
log started on Wed Sep 26 23:22:21 2012

connecting to SimConnect...
connected to FSX
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 17 AddOn(s)
Loading addon ZurichX
Addon ZurichX not installed or missing one or more files, skipping
Loading addon OHareX
Addon OHareX not installed or missing one or more files, skipping
Loading addon JFK
Addon JFK not installed or missing one or more files, skipping
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon LSGG
Addon LSGG not installed or missing one or more files, skipping
Loading addon KLAS
Addon KLAS not installed or missing one or more files, skipping
Loading addon KFLL
Addon KFLL not installed or missing one or more files, skipping
Loading addon PHNL
Addon PHNL not installed or missing one or more files, skipping
Loading addon KDFW
Addon KDFW not installed or missing one or more files, skipping
Loading addon HAWAII1
Addon HAWAII1 not installed or missing one or more files, skipping
Loading addon HAWAII2
Addon HAWAII2 not installed or missing one or more files, skipping
Loading addon KLAX
Addon KLAX not installed or missing one or more files, skipping
Loading addon ParkMe
Addon ParkMe not installed or missing one or more files, skipping
Loading addon GSX
Initializing audio...
Available devices:
  Generic Software on Lautsprecher (High Definition Audio-Gerät)
  Generic Software on Digitalaudio (S/PDIF) (High Definition Audio-Gerät)
  Generic Software on Kopfhörer (High Definition Audio-Gerät)
Created OpenAL device: Generic Software on Lautsprecher (High Definition Audio-Gerät)

Device info:
Major version: 1
Minor version: 1
Frequency: 44100
Refresh: 40
Sync: 0
Mono sources: 255
Stereo sources: 1
Extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_EFX

Context info:
Vendor: Creative Labs Inc.
Version: 1.1
Renderer: Software
Extensions: EAX EAX2.0 EAX3.0 EAX4.0 EAX5.0 EAX3.0EMULATED EAX4.0EMULATED AL_EXT_OFFSET

AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE

Using EFX 1.0 extension, with 1 auxiliary send(s)
Using EAX reverb
Current directory is F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator X
Looking for scenery.cfg in C:/ProgramData/Microsoft/FSX/scenery.cfg
.
.
.

Airport cache loaded
Addon GSX loaded
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon KSFO
Addon KSFO not installed or missing one or more files, skipping
Loading addon KPHX
Addon KPHX not installed or missing one or more files, skipping
Starting system monitors
SharedMemInterface connected
Loading aircraft data from Airplanes\PMDG 737-800NGX WL
Loading airport EDJA from Aerosoft/VFR-Airfields Traffic/scenery/EDJA_06.bgl
aircraftDb.py provides aircraft data with priority 2
Using aircraft data from aircraftDb.py
Loading airport EDDM from F:/Program Files (x86)/Microsoft Games/Microsoft Flight Simulator

X/aerosoft/Afd/scenery/AF2_eddm_2010.bgl
Using airport customization from GSX.airports.eddm_aerosoft

spinker

  • Jr. Member
  • **
  • Posts: 68
Re: GSX not working
« Reply #6 on: September 27, 2012, 01:58:57 am »

I have tried to delete only reference to scenery files but if this does not look right I will send complete log file.

Larry
-----------------------------------------------------------------------------------------------------------------------------------------------------

couatl v2.0 (build 2315)
log started on Wed Sep 26 18:00:50 2012

connecting to SimConnect...
connected to FSX
bglmanx non ready yet, waiting.
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 17 AddOn(s)

Loading addon ParkMe
Addon ParkMe loaded
Loading addon GSX
Initializing audio...
Available devices:
  Generic Software on Speakers (High Definition Audio Device)
  Generic Software on Digital Audio (S/PDIF) (High Definition Audio Device)
Created OpenAL device: Generic Software on Speakers (High Definition Audio Device)

Device info:
   Major version: 1
   Minor version: 1
   Frequency: 44100
   Refresh: 40
   Sync: 0
   Mono sources: 255
   Stereo sources: 1
   Extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_EFX

Context info:
   Vendor: Creative Labs Inc.
   Version: 1.1
   Renderer: Software
   Extensions: EAX EAX2.0 EAX3.0 EAX4.0 EAX5.0 EAX3.0EMULATED EAX4.0EMULATED AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE

Using EFX 1.0 extension, with 1 auxiliary send(s)
Using EAX reverb
Current directory is E:/FSX
Looking for scenery.cfg in C:/ProgramData/Microsoft/FSX/scenery.cfg
 
Airport cache loaded
Addon GSX loaded
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon KSFO
Addon KSFO loaded
Loading addon KPHX
Addon KPHX not installed or missing one or more files, skipping
Starting system monitors
SharedMemInterface connected
Loading aircraft data from Airplanes\beech_baron_58
intelliscene.cfg provides aircraft data with priority 1
aircraftDb.py provides aircraft data with priority 2
Using aircraft data from aircraftDb.py
Loading airport KLCI from Addon Scenery/scenery/KLCI_AFX_JC.bgl
Loading user customizations from C:\Users\larry\AppData\Roaming\Virtuali
\GSX\klci.ini

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51238
    • VIRTUALI Sagl
Re: GSX not working
« Reply #7 on: September 27, 2012, 10:42:06 am »
Both your logs shows that GSX has been loaded successfully and it's working. Are these logs made after you pressed CTRL+F12 ?

If not, do it again, press CTRL+F12 first and THEN exit from FSX and post the log.

spinker

  • Jr. Member
  • **
  • Posts: 68
Re: GSX not working
« Reply #8 on: September 27, 2012, 07:07:10 pm »
This time I used CTRL F12.
I tried to remove most scenery files.

NOTE:  Before this problem I had "couatl.exe" listed in my "msconfig" startup file, it is no longer listed in there.

I dont know if  this matters but GSX always loaded.

-------------------------------------------------------------------------------------------------------------------------------------------

couatl v2.0 (build 2315)
log started on Thu Sep 27 12:25:54 2012

connecting to SimConnect...
connected to FSX
connected to bglmanx
Loading addons
requesting AddOn list to bglmanx
bglmanx list contains 17 AddOn(s)
Loading addon ZurichX
Addon ZurichX loaded
Loading addon OHareX
Addon OHareX not installed or missing one or more files, skipping
Loading addon JFK
Addon JFK not installed or missing one or more files, skipping
Loading addon XPOI
Addon XPOI not installed or missing one or more files, skipping
Loading addon LSGG
Addon LSGG loaded
Loading addon KLAS
Addon KLAS loaded
Loading addon KFLL
Addon KFLL loaded
Loading addon PHNL
Addon PHNL loaded
Loading addon KDFW
Addon KDFW not installed or missing one or more files, skipping
Loading addon HAWAII1
Addon HAWAII1 loaded
Loading addon HAWAII2
Addon HAWAII2 loaded
Loading addon KLAX
Addon KLAX loaded
Loading addon ParkMe
Addon ParkMe loaded
Loading addon GSX
Initializing audio...
Available devices:
  Generic Software on Speakers (High Definition Audio Device)
  Generic Software on Digital Audio (S/PDIF) (High Definition Audio Device)
Created OpenAL device: Generic Software on Speakers (High Definition Audio Device)

Device info:
   Major version: 1
   Minor version: 1
   Frequency: 44100
   Refresh: 40
   Sync: 0
   Mono sources: 255
   Stereo sources: 1
   Extensions: ALC_ENUMERATE_ALL_EXT ALC_ENUMERATION_EXT ALC_EXT_CAPTURE ALC_EXT_EFX

Context info:
   Vendor: Creative Labs Inc.
   Version: 1.1
   Renderer: Software
   Extensions: EAX EAX2.0 EAX3.0 EAX4.0 EAX5.0 EAX3.0EMULATED EAX4.0EMULATED AL_EXT_OFFSET AL_EXT_LINEAR_DISTANCE AL_EXT_EXPONENT_DISTANCE

Using EFX 1.0 extension, with 1 auxiliary send(s)
Using EAX reverb
Current directory is E:/FSX
Looking for scenery.cfg in C:/ProgramData/Microsoft/FSX/scenery.cfg
Airport cache loaded
Addon GSX loaded
Loading addon ENBR
Addon ENBR not installed or missing one or more files, skipping
Loading addon KSFO
Addon KSFO loaded
Loading addon KPHX
Addon KPHX not installed or missing one or more files, skipping
Starting system monitors
SharedMemInterface connected
Loading aircraft data from Airplanes\beech_baron_58
intelliscene.cfg provides aircraft data with priority 1
aircraftDb.py provides aircraft data with priority 2
Using aircraft data from aircraftDb.py
Loading airport KLCI from Addon Scenery/scenery/KLCI_AFX_JC.bgl
Loading user customizations from C:\Users\larry\AppData\Roaming\Virtuali\GSX\klci.ini
                                                             disconnected from SimConnect.

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: GSX not working
« Reply #9 on: September 27, 2012, 07:54:00 pm »
Yes, yes, I pressed more then one time CTRL+F12.


And as I said, I tried other keyassignments, too (but CTRL+F12 was working before, too)

data63

  • Full Member
  • ***
  • Posts: 123
Re: GSX not working
« Reply #10 on: September 27, 2012, 09:05:05 pm »
maybe another Addon that uses the CTRL+F12 key and "capturing" that key ?

Happy Landings

Juergen

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: GSX not working
« Reply #11 on: September 27, 2012, 09:10:55 pm »
I think not, otherwise it would make sense, that other keycombinations (e.g. CTRL+F11) do also not work.
And it worked a few days ago ...



Is there a procedure to uninstall this FSdreamteam Stuff completely (I just have GSX)?
Even in the registry etc etc?
Maybe such a clean reinstall could help?

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: GSX not working
« Reply #12 on: September 27, 2012, 09:23:08 pm »
OOOOOHHHHHHhhhhhhhhhhhhhh NNNooooooooo!


I have such a twinky winky keyboard where you can self define F-Keys (which I do not use.)
But that means also, that F-Keys could be disabled (which I have done accidently obvisously)


Dooooh...

I just wondered, why I can't refresh my browser (F5) and then realised what's going on ...

I deeply apologize if I have caused any trouble here!
But maybe, my "solution" is also valid for Larry  ;)


I'm getting slightly old ...
 :-[

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51238
    • VIRTUALI Sagl
Re: GSX not working
« Reply #13 on: September 27, 2012, 09:40:46 pm »
NOTE:  Before this problem I had "couatl.exe" listed in my "msconfig" startup file, it is no longer listed in there.

This was very wrong, and none of our installers put it there. If a file is listed in the msconfig startup list, it means Windows will load it at startup but this is not how it's supposed to work. It's FSX that will launch, using the EXE.XML file.

However, I don't think this is your problem. Your log still doesn't show any error, I'm sorry, but the only possible explanation is that you are not pressing the right key, see the Guenseli reply.

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: GSX not working
« Reply #14 on: September 27, 2012, 09:48:03 pm »
Quote
you are not pressing the right key, see the Guenseli reply.

I have pressed the right key!!!!


... however, the key itself was not activated  ;D