Products Support > GSX Support MSFS
GSX Pro Short-term Roadmap: what to expect in the next updates.
CONC_X:
--- Quote from: virtuali on January 18, 2024, 09:53:17 am ---
--- Quote from: CONC_X on January 18, 2024, 12:59:48 am ---Is an ASU planned?
--- End quote ---
Most airplanes that needs one, comes already with one.
--- Quote ---Is the DC Designs Concorde also suitable for boarding bridges? Because with the current configuration, they do not adapt correctly to the plane. (view the photo)
--- End quote ---
You haven't posted any picture.
--- Quote ---Regarding pushbacks, I also confirm that tractors often take 90° angles and push the plane across (as if it were sliding on the ground). I'll try to take a screenshot at this time, it hasn't already been done by someone else.
--- End quote ---
They normally don't. If they do it for you, always do a proper report, clearly indicating what is happening, where, if you use a GSX profile, everything.
--- End quote ---
Thank you for your reply.
Yeah sorry I forgot the screenshots! ;D
For the boarding bridge, here is a screen of the DC Designs Concorde in boarding gate E20 at Toulouse-Blagnac Airport (LFBO) (Flightbeam Studios – LFBO Toulouse–Blagnac Airport v1.0.1)
https://i.ibb.co/FK6D0mK/Microsoft-Flight-Simulator-Screenshot-2024-01-18-14-42-17-48.png
https://i.ibb.co/VTR6H38/Microsoft-Flight-Simulator-Screenshot-2024-01-18-14-42-48-79.png
No GSX profile is used for the aircraft, only for the airport itself. (link of the airport GSX profile : https://fr.flightsim.to/file/40917/flightbeam-lfbo-gsx-profile)
The mobile stairs work perfectly, the problem only comes from the boarding bridges.
You will also see the incorrect positioning of the Fuel Truck and the GPU cable floating in the air.
Concerning the pushback, you will find attached the screen of the pushback in E20, on taxiway T43. The tractor completely exceeds the maximum turning angle of the plane, causing it to slide for several meters.
https://i.ibb.co/FXDhmvp/Microsoft-Flight-Simulator-Screenshot-2024-01-18-14-48-04-72.png
https://i.ibb.co/StyWxRt/Microsoft-Flight-Simulator-Screenshot-2024-01-18-14-48-13-90.png
https://i.ibb.co/RC3816c/Microsoft-Flight-Simulator-Screenshot-2024-01-18-14-48-24-81.png
https://i.ibb.co/y6Fx0gb/Microsoft-Flight-Simulator-Screenshot-2024-01-18-14-48-39-64.png
Pushback problems also occur with other more classic aircraft (PMDG 737 / Fenix A320 etc.)
Thank you for your help
Atrius:
--- Quote from: Flightdoc on January 05, 2024, 11:20:17 pm ---Would be nice to see a roadmap summary covering january to june or up to version 3.0 Pro -- this is a massively long thread so if the information is in there its hard to find. GSX Pro adds so much to the game! thanks
--- End quote ---
Completely agree on this one. All updates are much appreciated, but it's quite hard to follow what's coming.
virtuali:
--- Quote from: CONC_X on January 18, 2024, 03:00:44 pm ---The mobile stairs work perfectly, the problem only comes from the boarding bridges.
--- End quote ---
GSX doesn't have anything to do with jetways. How they work (or not) how they connect (or not) and to which door they connect (good or bad), is completely OUTSIDE any control by GSX. Jetways in MSFS are affected ONLY by:
- How the jetways are modeled (and in your case, you are reporting an issue with a jetway that comes with a scenery so, it's not even a GSX jetway)
- How the airplane is parked
- How the doors are configured in the airplane (NOT in GSX!!!)
--- Quote ---No GSX profile is used for the aircraft.
--- End quote ---
This is clearly a mistake on your part. The DC Design Concorde is NOT included in the GSX internal database, so you MUST have a profile for it, either made by yourself, or by somebody else who shared it to download it. Without an airplane profile, an airplane that is not already internally supported by GSX simply won't work, at all.
--- Quote ---You will also see the incorrect positioning of the Fuel Truck
--- End quote ---
Caused by the lack of a GSX profile for that aircraft.
--- Quote ---and the GPU cable floating in the air.
--- End quote ---
That's a separate issue, we don't have a GPU with a cable long enough for a Concorde. We'll look into it, when FS Labs will release their own so, at least, the work to update the GPU would be worth for at least 2 airplanes.
--- Quote ---Concerning the pushback, you will find attached the screen of the pushback in E20, on taxiway T43. The tractor completely exceeds the maximum turning angle of the plane, causing it to slide for several meters.
--- End quote ---
That's only because either the airport profile you are using doesn't provide for custom Pushbacks or, if it does, whoever made the profile made it for a smaller airplane and haven't tested it with a Concorde. However, your lack of an airplane profile will also affect this. All these kind of issues are always fixable by adapting a Custom Pushback to the parking, being sure the curve won't require such extreme steering.
--- Quote ---Pushback problems also occur with other more classic aircraft (PMDG 737 / Fenix A320 etc.)
--- End quote ---
No, they don't, if the pushback procedure is programmed correctly.
CONC_X:
Thank you for all this information! I wasn't aware of most of it, and it's good to have that clarified.
shadowsurfer:
Hi there,
First time posting on the forum so wanted to take this opportunity to thank the FSDT team for their incredible contribution to MSFS. Your products have truly been game changing.
One thing I wanted to ask about, is the possibility of adding wingwalkers during pushback and taxiing into the gate. I know this feature has no major significance, nor would it change much, but I think it would be a really cool extra level of immersion and realism.
Thanks and hoping to see more great features in the coming updates.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version