GSX problem after using FSDT Live Update

[Hossi]

Hi,
yesterday I used FSDT Live Update.
This was not a good idea. At many airports
such as Corfu, Tromsø or Bildbao disappearing the Jetways
as soon as you drive them up to the aircraft.
Furthermore, it is no longer possible at any airport to set up
park positions. As soon as the button "Customize vehicle
locations followed by the OK button is clicked on, the airport rotates.
like a carousel. It's look like I used the Y-Button from the PC keyboard.
What is happened there? Can the update be undo?

Greetings from Kiel North Germany
Ciao
Horst

[Hossi]

I have just seen that the problem is already known
and an answer has been given to it, please excuse me

[virtuali]

Try this installer, it's not MSFS-specific, it's just an offline copy of the files you were *supposed* to get from the servers:

http://www.fsdreamteam.com/forum/index.php/topic,26480.msg175191.html#msg175191

Before we can look into possible issues, we need to be sure you get the right files.

[Hossi]

Hi,
I used the link but GSX does not work any more. As soon as I operate
Jetway, all jetways of the immediate vicinity have disappeared.
For example, in EDDM I set the A320 to parking position 244, Operate
jetways and at 7 positions the jetways are gone.
In EDDH and EDDB the the jetways remain and are driven up to the aircraft.
What no longer works at all airports is, you can't set up parking positions anymore.
Since then, when I start opereate jetway, I get update from 20.8.2022, every time I
start opreation jetway a voice appears that something about engines. Unfortunately
I cannot understand what exactly is being said. Should this mean that  the engine should be switched off,
that is not correct, because I always set my A320 cold&dark to the parking position.

Ciao
Horst

[dlh716]

Try this installer, it's not MSFS-specific, it's just an offline copy of the files you were *supposed* to get from the servers:

http://www.fsdreamteam.com/forum/index.php/topic,26480.msg175191.html#msg175191

Before we can look into possible issues, we need to be sure you get the right files.

Hello,

I downloaded and installed one of those links. However, the problems are still there.
As Horst, when I try to operate the jetway by selecting "Operate jetway(s)" or even "Request boarding", the SODE jetways disappear.
Moreover, when I try to customize a parking position, the aircraft moves and starts to turn on itself, as in the slew mode of P3D.

Thanks in advance for your help,

Best regards,

Yann

[Hossi]

Hi,
since the update of GSX there is another
oddity:
Every time I start P3D, a window with this text appears:
Building Database for new scenery files. This Process
take a few Moments

Ciao Horst

[virtuali]

As Horst, when I try to operate the jetway by selecting "Operate jetway(s)" or even "Request boarding", the SODE jetways disappear.

This has been fixed, check the relevant thread here:

http://www.fsdreamteam.com/forum/index.php/topic,26690.msg175882.html#msg175882

Moreover, when I try to customize a parking position, the aircraft moves and starts to turn on itself, as in the slew mode of P3D.

GSX always entered in Slew mode in P3D, that problem is usually caused by an uncalibrated joystick assigned to the Slew axes.

[dlh716]

As Horst, when I try to operate the jetway by selecting "Operate jetway(s)" or even "Request boarding", the SODE jetways disappear.

This has been fixed, check the relevant thread here:

http://www.fsdreamteam.com/forum/index.php/topic,26690.msg175882.html#msg175882

Hello Umberto,
Thank you for your reply.
When you say the Live Update is supposed to download the two files, you are still referring to the same Live Update downloadable at http://www.fsdreamteam.com/forum/index.php/topic,26480.msg175191.html#msg175191 ?

Moreover, when I try to customize a parking position, the aircraft moves and starts to turn on itself, as in the slew mode of P3D

GSX always entered in Slew mode in P3D, that problem is usually caused by an uncalibrated joystick assigned to the Slew axes.

I've been using P3D's slew mode for a very long time and it's always worked well. I haven't changed my controls or their calibration recently. The problem only occurres since the update of GSX. But I'll try to recalibrate them if you think that's the problem.

Thanks again for your reply and help.

[Hossi]

Hello Umberto,
I have solved the problem with a backup software.
With restore I reset P3D to 7.8. 2022 Now
everything is OK again with GSX..
However, I will hold off to start FSDT Live Update.
Please announce here in the forum if  Live Update for P3D
is able to be using again without problems.
Thank you for your efforts.

Ciao Horst