« previous next »
Pages: 1 2 [3] 4

Author Topic: All active Jetways stopped due to Main Module (exe)  (Read 9401 times)

skipy33

  • Jr. Member
  • **
  • Posts: 69
Re: All active Jetways stopped due to Main Module (exe)
« Reply #30 on: August 22, 2022, 05:56:52 pm »
I remember the first time I've used GSX after the update. It was on a parking stand without jetway and an AI aircraft was standing very close too me (due to AFCAD). The AI aircraft disappeared exactly as the SODE jetway does on other gate.... As a workaround when I'm at a gate with SODE jetway I start GSX boarding or deboarding, the jetway is deleted, I go in SODE menu to reload all and then dock the jetway via SODE menu and it works until the next GSX step (pushback).

Skip. 
Logged

hwmertens

  • Newbie
  • *
  • Posts: 49
Re: All active Jetways stopped due to Main Module (exe)
« Reply #31 on: August 22, 2022, 06:19:23 pm »
Quote
Yes, this is the issue that every P3D user who ran the updater is encountering. The manual Addon Manager installer does nothing to fix this.
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51400
    • VIRTUALI Sagl
Re: All active Jetways stopped due to Main Module (exe)
« Reply #32 on: August 22, 2022, 07:23:35 pm »
I checked your log and it doesn't show anything wrong, other than the sim crashed when you called GSX. The only unusual thing you had 0 payload, was that the case ?
Logged

hwmertens

  • Newbie
  • *
  • Posts: 49
Re: All active Jetways stopped due to Main Module (exe)
« Reply #33 on: August 22, 2022, 07:40:48 pm »
Quote from: virtuali on August 22, 2022, 07:23:35 pm
I checked your log and it doesn't show anything wrong, other than the sim crashed when you called GSX. The only unusual thing you had 0 payload, was that the case ?
Was an early morning flight and I entered an empty aircraft ;). Something wrong with that?

Edit:
Tried to move the jetway with 4 to payload, 161 pax and 6.29 to fuel onboard using GSX. The SODE jetway just disappeared as it is now "normal" since i bought and installed GSX pro.
Thanks for that!
« Last Edit: August 22, 2022, 08:08:28 pm by hwmertens »
Logged

airbadger

  • Sr. Member
  • ****
  • Posts: 343
Re: All active Jetways stopped due to Main Module (exe)
« Reply #34 on: August 23, 2022, 03:25:56 am »
What is the status of getting this issue fixed? I get that P3D is all but dead but it would be nice to be able to use GSX again, which many of us haven’t been able to do since Thursday.
Logged

trisho0

  • Sr. Member
  • ****
  • Posts: 367
Re: All active Jetways stopped due to Main Module (exe)
« Reply #35 on: August 23, 2022, 04:41:55 am »
+1. I am waiting for new installers, updates or patches. Jetways still disappearing with FSX and P3D v4 and v5.

Patricio Valdes
Logged

BU830

  • Newbie
  • *
  • Posts: 12
Re: All active Jetways stopped due to Main Module (exe)
« Reply #36 on: August 23, 2022, 10:23:31 am »
Same here.. Obviously a problem caused by the new GSX update - end!
Logged

skipy33

  • Jr. Member
  • **
  • Posts: 69
Re: All active Jetways stopped due to Main Module (exe)
« Reply #37 on: August 23, 2022, 06:58:13 pm »
You know what? I've just installed the MSFS version of GSX and made a quick test. The first thing GSX is doing when invoking something is to remove all sim objects near the aircraft. A good thing with MSFS because it removes default trucks and stairs around. But why this code is also running in the P3D version???? It's the reason why SODE jetways near the aircraft are deleted. The GSX configuration is the same for both simulators.

Skip.
Logged

BU830

  • Newbie
  • *
  • Posts: 12
Re: All active Jetways stopped due to Main Module (exe)
« Reply #38 on: August 23, 2022, 07:14:06 pm »
Quote from: skipy33 on August 23, 2022, 06:58:13 pm
You know what? I've just installed the MSFS version of GSX and made a quick test. The first thing GSX is doing when invoking something is to remove all sim objects near the aircraft. A good thing with MSFS because it removes default trucks and stairs around. But why this code is also running in the P3D version???? It's the reason why SODE jetways near the aircraft are deleted. The GSX configuration is the same for both simulators.

Skip.

Possible, maybe Umberto can look into it
Logged

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51400
    • VIRTUALI Sagl
Re: All active Jetways stopped due to Main Module (exe)
« Reply #39 on: August 23, 2022, 11:35:40 pm »
Quote from: skipy33 on August 23, 2022, 06:58:13 pm
The first thing GSX is doing when invoking something is to remove all sim objects near the aircraft. A good thing with MSFS because it removes default trucks and stairs around. But why this code is also running in the P3D version???? It's the reason why SODE jetways near the aircraft are deleted. The GSX configuration is the same for both simulators.

I think you caught that! Yes, we made a change and before we removed only groundvehicles in P3D, in MSFS we remove everything, because there are humans, ai planes, static planes, etc.

I've added back the "only ground vehicles" rule, in FSX/P3D only. Try to get it from Live Update, so we can test if it's working, otherwise I'll place the fix in the offline installer and rebuild it.

The Live Update is supposed to download these two files:

\Addon manager\Couatl\common\__INIT__.PYE
\Addon manager\Couatl\GSX\__INIT__.PYE
Logged

Peter Lund

  • Newbie
  • *
  • Posts: 20
Re: All active Jetways stopped due to Main Module (exe)
« Reply #40 on: August 23, 2022, 11:44:52 pm »
Quote from: virtuali on August 23, 2022, 11:35:40 pm
Quote from: skipy33 on August 23, 2022, 06:58:13 pm
The first thing GSX is doing when invoking something is to remove all sim objects near the aircraft. A good thing with MSFS because it removes default trucks and stairs around. But why this code is also running in the P3D version???? It's the reason why SODE jetways near the aircraft are deleted. The GSX configuration is the same for both simulators.

I think you caught that! Yes, we made a change and before we removed only groundvehicles in P3D, in MSFS we remove everything, because there are humans, ai planes, static planes, etc.

I've added back the "only ground vehicles" rule, in FSX/P3D only. Try to get it from Live Update, so we can test if it's working, otherwise I'll place the fix in the offline installer and rebuild it.

The Live Update is supposed to download these two files:

\Addon manager\Couatl\common\__INIT__.PYE
\Addon manager\Couatl\GSX\__INIT__.PYE

I just tried running the live updater and my issues in P3D is now solved and the SODE gate works again  :D
Logged

marco goncalves

  • Newbie
  • *
  • Posts: 14
Re: All active Jetways stopped due to Main Module (exe)
« Reply #41 on: August 24, 2022, 12:29:58 am »
So your able to call all GSX services just like before ?

All is working ?

You just run the update tool ?

Logged

Papacoach

  • Jr. Member
  • **
  • Posts: 55
Re: All active Jetways stopped due to Main Module (exe)
« Reply #42 on: August 24, 2022, 01:50:25 am »
Working here too! Thanks very much to the user(@skipy33) for their contribution, and to Umberto.
« Last Edit: August 24, 2022, 02:13:31 am by Papacoach »
Logged

jalbino59

  • Jr. Member
  • **
  • Posts: 75
Re: All active Jetways stopped due to Main Module (exe)
« Reply #43 on: August 24, 2022, 02:06:00 am »
Thank you to skipy33 for identifying the fault in the logic that lead to this fix. Without your contribution it might have taken much longer. KUDOS
Logged

peja1591

  • Newbie
  • *
  • Posts: 14
Re: All active Jetways stopped due to Main Module (exe)
« Reply #44 on: August 24, 2022, 02:11:27 am »
Still not working for me in p3d v5.3. No flightbeam
Airport is working probably with GSX.. only shows one gate available and cannot start GSX services
Logged
Pages: 1 2 [3] 4
« previous next »