Author Topic: Airplane config being reset on load.  (Read 1923 times)

tbarker1989

  • Newbie
  • *
  • Posts: 11
Airplane config being reset on load.
« on: May 30, 2021, 02:52:48 am »
I have the FSL A320 SL IAE settings set to belts for the cargo but every time I load the plane it is resetting the loader to AKH instead of BELT. Is this FSL or GSX? I have seen the file modified time change when I load the airplane.

Thanks.

Tim

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51462
    • VIRTUALI Sagl
Re: Airplane config being reset on load.
« Reply #1 on: May 31, 2021, 01:11:19 pm »
Quote
I have seen the file modified time change when I load the airplane.

Which file, exactly ?

tbarker1989

  • Newbie
  • *
  • Posts: 11
Re: Airplane config being reset on load.
« Reply #2 on: June 02, 2021, 04:26:31 pm »
The file is the gsx.cfg in the Appdata/Roaming/Virtuali/Airplanes/FSLabs A320-SL IAE folder. When I load the airplane it rewrites the cargo loader option. I believe this would happen with the A320 SL CFM, A321 SL CFM, and A321 SL IAE as well but I have not tested it.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51462
    • VIRTUALI Sagl
Re: Airplane config being reset on load.
« Reply #3 on: June 02, 2021, 06:57:59 pm »
When I load the airplane it rewrites the cargo loader option.

Please clarify what do you mean with cargo loader option. There are 3 cargo doors that can be configured on the airplane configurations, which one is being changed ?

Are you sure it's the option on the *airplane* configuration that's being changed ? Could be you are referring to the cargo loader option in the *parking* configuration instead ?
« Last Edit: June 02, 2021, 07:00:28 pm by virtuali »

tbarker1989

  • Newbie
  • *
  • Posts: 11
Re: Airplane config being reset on load.
« Reply #4 on: June 02, 2021, 08:09:00 pm »
Yes it is the airplane configuration. The bottom line of each door the ULDCODE changes from BELT to AKH when I start the sim.

[cargo1]
pos = 0.96 6.28 -2.13 0.00
code = (L:FSLA320_upper_cargo_door, number) 2900 >=
name = Upper Cargo Door
embeddedStair = 0
uldcode = BELT

[cargo2]
pos = 0.94 -8.14 -2.13 0.00
code = (L:FSLA320_lower_cargo_door, number) 2900 >=
name = Lower Cargo Door
embeddedStair = 0
uldcode = BELT