PMDG 737NGXU

[cartayna]

Hello,

Is there any update that will make this new Airplane work with GSX?

I get no matter if i configurate a new airplane, nor open all the doors, the message Open Exit2...

luggage does not load either.

Cheers.

[Pirateinparadise]

Until Umberto gets back....

This works for the Southwest variant. There are probably some minor errors as I coped these values from using "Customize aircraft" on the NGX and then manually inputting them into customize aircraft for the NGXu, but it'll do until they are added to GSX's internal database. I have NOT tested the staircase position. I have them disabled at the airport where I tested this. Just adjust it in the customize aircraft editor if it's wrong. It should be close.

• Create a folder called "PMDG 737-800NGXu SSW" in your C:\Users\<your_username>\AppData\Roaming\Virtuali\Airplanes\ folder.
• Create a new text document called "gsx.cfg" in your newly created folder.
• Paste the red text below into the gsx.cfg file and save it.
• Enjoy!

[aircraft]
nosegear = 12.39
refueling = 0
battery = 0
pushbackraise = 0
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 3.88 -1.46 0.46
wingtippos = 15.19 -6.70 1.35
fuelpos = 13.28 -5.77 0.99
waterpos = 0.00 0.00 -0.00
lavatorypos = 0.00 0.00 -0.00
engine1pos = -4.95 1.05 -0.79
engine2pos = 4.95 1.05 -0.78
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -1.67 11.51 0.44 7.80
code = (L:NGXFwdLeftCabinDoor,number)
name = L Entry FWD
embeddedStair = 0

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.47 -15.54 0.46 -12.00
code = (L:NGXAftLeftCabinDoor, bool)
name = L Entry AFT
embeddedStair = 0

[service1]
pos = 1.61 11.89 0.46 -8.60
code = (L:NGXFwdRightCabinDoor, bool)
name = R Entry FWD
embeddedStair = 0

[service2]
pos = 1.46 -15.54 0.44 11.00
code = (L:NGXAftRightCabinDoor, bool)
name = R Entry AFT
embeddedStair = 0

[cargo1]
pos = 0.77 8.02 -0.98 0.00
code = (L:NGXFwdCargoDoor, bool)
name = Cargo FWD
embeddedStair = 0
uldcode = AUTO

[cargo2]
pos = 0.85 -11.59 -0.86 10.00
code = (L:NGXAftCargoDoor, bool)
name = Cargo AFT
embeddedStair = 0
uldcode = AUTO

[cargomain]
remove = 1

[cartayna]

My man!!
thanks a lot!

I am actually testing it on a Turkish and it seems to be working..
apreciate it!!
cheers

[cartayna]

Until Umberto gets back....

This works for the Southwest variant. There are probably some minor errors as I coped these values from using "Customize aircraft" on the NGX and then manually inputting them into customize aircraft for the NGXu, but it'll do until they are added to GSX's internal database. I have NOT tested the staircase position. I have them disabled at the airport where I tested this. Just adjust it in the customize aircraft editor if it's wrong. It should be close.

• Create a folder called "PMDG 737-800NGXu SSW" in your C:\Users\<your_username>\AppData\Roaming\Virtuali\Airplanes\ folder.
• Create a new text document called "gsx.cfg" in your newly created folder.
• Paste the red text below into the gsx.cfg file and save it.
• Enjoy!

[aircraft]
nosegear = 12.39
refueling = 0
battery = 0
pushbackraise = 0
pushbackdummyevent = 0
iscargo = 0
trafficcones = 1
preferredexit =  0
wingrootpos = 3.88 -1.46 0.46
wingtippos = 15.19 -6.70 1.35
fuelpos = 13.28 -5.77 0.99
waterpos = 0.00 0.00 -0.00
lavatorypos = 0.00 0.00 -0.00
engine1pos = -4.95 1.05 -0.79
engine2pos = 4.95 1.05 -0.78
engine3pos = 0.00 0.00 0.00
engine4pos = 0.00 0.00 0.00

[exit1]
pos = -1.67 11.51 0.44 7.80
code = (L:NGXFwdLeftCabinDoor,number)
name = L Entry FWD
embeddedStair = 0

[exit2]
remove = 1

[exit3]
remove = 1

[exit4]
pos = -1.47 -15.54 0.46 -12.00
code = (L:NGXAftLeftCabinDoor, bool)
name = L Entry AFT
embeddedStair = 0

[service1]
pos = 1.61 11.89 0.46 -8.60
code = (L:NGXFwdRightCabinDoor, bool)
name = R Entry FWD
embeddedStair = 0

[service2]
pos = 1.46 -15.54 0.44 11.00
code = (L:NGXAftRightCabinDoor, bool)
name = R Entry AFT
embeddedStair = 0

[cargo1]
pos = 0.77 8.02 -0.98 0.00
code = (L:NGXFwdCargoDoor, bool)
name = Cargo FWD
embeddedStair = 0
uldcode = AUTO

[cargo2]
pos = 0.85 -11.59 -0.86 10.00
code = (L:NGXAftCargoDoor, bool)
name = Cargo AFT
embeddedStair = 0
uldcode = AUTO

[cargomain]
remove = 1

Can i thank u in my Facebook page?
cheers

[Pirateinparadise]

Fire away. I'm not on the book of face, so I'll never see it... Take credit and everything. LOL

And the aft staircase position looks good. I just landed at an airport with them enabled. 

[vrouleau]

Thanks!

[cartayna]

Thanks!

LOL nope, no need to take what is not mine.. works... smooth!
cheers mate

[airbadger]

Speaking of NGXU, is there a reason baggage unloading is completed so quickly? It's done it like 2 minutes.

[cartayna]

Speaking of NGXU, is there a reason baggage unloading is completed so quickly? It's done it like 2 minutes.

is that faster than the rest? could not say.. 2 min sounds like all of them.

[Captain Kevin]

What are your payload weights.

[virtuali]

Native support for the PMDG 737 Update is online now on Live Update.

Please remove *every* customization file you made/downloaded before the update, otherwise the native support won't be used.

[rcoultas62]

Thanks Umberto!

[Wothan]

Thanks alot.

But could You please fix the re-fueling gue from hovering high above the aircraft wing as if he is using a jetpack ?

This is where the fuel is drawn from a well on the appron  beside the aircraft - think it´s called fuel hydrant.

[virtuali]

But could You please fix the re-fueling gue from hovering high above the aircraft wing as if he is using a jetpack ?

Nothing of that is happening.

The 737 wing is not high enough to have a refueling guy ( either Tanker or Hydrant ) because, such vehicles will appear ONLY if the refueling point under the wing is higher than 3.40 meters, and the configuration we made for the 737 is surely lower than that so, you are supposed to see the smaller vehicle with no guy.

If you are seeing the guy, it's because you are not using the GSX internal configuration, you are probably using one you made/downloaded which has the refueling point wrong or not set at all.

[Wothan]

Sorry to say, but GSX Aircarft editor tells:

Aircraft data available from these sources: Internal Database
Aircraft data used by GSX: Internal Database

I have removed all 737 profiles from: C:\Users\[user name]\AppData\Roaming\Virtuali\Airplanes\
Only profiles present are those for the, Maddog X, Majestic Dash 8 Q-400, PMDG 747-8's and PMDG-400's

There are no GSX.cfg files in the PMDG 747 NGXu aircraft folders (under Simobjects).

Note that I'm used to navigate through the P3D folder structure.


Finn Jacobsen