GSX/Lv2 Jetways created prior to Latest Update not Returning

[fernandito]

Hi Folks;
I have finally got my GSX-Lv2 to work in both of my Sims (PD3v4.5 & FSX:SE) however, all of the Jetways created previously to install the latest update are not returning and an empty space shows at the Jetway location. SODEs so far are working fine. In addition the Catering Vehicles have no decal or labels picked at the GSX Option to Customized Airport Positions. Everything else works just fine thus far. Advise, Suggestion and guidance to fix this problem please?.

FRL

[virtuali]

Are you having the same problem in both simulators ?

[fernandito]

Yes Sir!

[virtuali]

That's kind of strange, because they install objects in very different ways. In addition to that, you said under P3D4.5 objects have no decals,. but this is supposed to happen only on FSX, or older (non-PBR) versions of P3D.

Have maybe disabled RTT in the Addon Manger options ? Disable means the checkmark on "Disable RTT" is set, which is not default, it should always be not set, unless in very special cases.

[fernandito]

SUCCESS!!..That was it "RTT Disable". Gates are present and labels on catering vehicles. at KATL Thank you so much!

OPS!...Just doing a test with Aerosoft Airbus 319 at KFLL currently, Jetway 1ea previously created will not show and when attempt to create I get that same message;
The Addon<unknown> is causing the Couatl Scripting Engine to start. Please download and install the latest Stand Alone-Addon.....etc...etc. I did also ensure that the RTT was disable and the second attempt.

Guidance or Suggestion Please?

[virtuali]

Please download and install the latest Stand Alone-Addon, etc...etc

You have replaced with "etc, etc" the only thing I need to understand what's wrong. The error detail log that you are asked to open to see the actual error text which, even if you don't understand, it's useful to us to troubleshoot.

[fernandito]

I am almost sure that I have taken this action already so I wrote etc..etc..just to keep it short.
The whole message displayed below
The Addon<unknown> is causing the Couatl Scripting Engine to start. Please download and install the latest Stand Alone-Addon. What follows it's the option to dowload the StandAlone Manager from http address of fsdreamteam and to chose YES or NO to choose. Will proceed to download, install, test it and post feedback Sir.
Question....Once at that page I see 2ea option...download for FSX Version Here. That would be the one for both FSX;SE & PD3v4.5...correct?, since the other option it's for FS9 and that would not applies to me?

[fernandito]

Dowloaded the FSX Version StandAlone Manager from http://www.fsdreamteam.com/sa-addon-manager. Still No previous Jetway shows only an empty dock. Proceeded to use the Reset Option, the Original Jetway at KFLL still do not show.

[virtuali]

Dowloaded the FSX Version StandAlone Manager from http://www.fsdreamteam.com/sa-addon-manager.

How you could possibly have done that, considering there NO "FSX version of the Addon Manager", and there's a clear explanation on that very same page which says:

Since 2017, with the new Live Update system, the FSX/P3D version of the Stand-Alone Addon Manager is not required anymore, since the LIve Update program can keep all FSDT products which are currently installed, always updated.

So, I wonder *what* "FSX version of the Addon Manager" you might have possibly installed, considering there's no such thing anymore on that page.

And besides, why you are doing things I'm not asking to do ? I asked to post the content of your error log, the one that you are suggested to open when that error message comes out.

[fernandito]

I am just reporting what I see on the screen my friend. I am just trying to stay pro active as I get feedback. Its a bit difficult to comprehend sometimes. Yesterday attempt depasrting from KATL GSXLv2 Jetways did appeared and all system worked. I am currently setting up again to fly there and test.
Ok!..lets see if I am tracking correctly now. I got into the event viewer and this it's a recent error msg while I was just trying to fly an Aerosoft Airbus Vehicle out of KFLL with PD3v4.5 where I had created a jetway previously with GSXLv2. The System just completely crashed again and I am consulting the folks at the Prepar & Aerosoft forum as we interact now.

*Error    8/24/2019 12:16:44 PM    Application Error    1000    (100)
Faulting application name: Couatl.exe, version: 3.2.0.4244, time stamp: 0x5d49affc
Faulting module name: ucrtbase.dll, version: 10.0.17763.404, time stamp: 0x93e4fbe5
Exception code: 0xc0000409
Fault offset: 0x000a51eb
Faulting process id: 0x2648
Faulting application start time: 0x01d55a86c687f2d4
Faulting application path: C:\Program Files (x86)\Addon Manager\Couatl\Couatl.exe
Faulting module path: C:\WINDOWS\System32\ucrtbase.dll
Report Id: b4341943-09bd-43e8-bc35-403d357551ed
Faulting package full name:
Faulting package-relative application ID:
*Information    8/24/2019 12:17:01 PM    Windows Error Reporting    1001    None
Fault bucket 1208293238425734484, type 5
Event Name: BEX
Response: Not available
Cab Id: 0
Problem signature:
P1: Couatl.exe
P2: 3.2.0.4244
P3: 5d49affc
P4: ucrtbase.dll
P5: 10.0.17763.404
P6: 93e4fbe5
P7: 000a51eb
P8: c0000409
P9: 00000007
P10: 
Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERACDA.tmp.mdmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERDCE4.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERDF85.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERDF95.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WERDFC4.tmp.txt
These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Couatl.exe_a4b915f51f262352a8a8fb3f22054e9d2ef2f96_b793aec8_446be407
Analysis symbol:
Rechecking for solution: 0
Report Id: b4341943-09bd-43e8-bc35-403d357551ed
Report Status: 268435456
Hashed bucket: 8f8cb5336605a83630c4b84c6cdf4d54
Cab Guid: 0

[virtuali]

Read the explanation in this thread, and see if it might apply to you:

http://www.fsdreamteam.com/forum/index.php/topic,21730.msg147606.html#msg147606

[fernandito]

Sorry Sir...Forgot to add that additional info on the last post, please recheck. Will follow that last link on your post and send feedback. Thanks.
 

[fernandito]

FYI...Same result at KMIA....For the looks of it this will be the same scenario with all Airports Addons that I have previously created Lv2 Jetways correct?.
*Error   8/24/2019 1:21:38 PM   Application Error   1000   (100)
Faulting application name: Couatl.exe, version: 3.2.0.4244, time stamp: 0x5d49affc
Faulting module name: ucrtbase.dll, version: 10.0.17763.404, time stamp: 0x93e4fbe5
Exception code: 0xc0000409
Fault offset: 0x000a51eb
Faulting process id: 0x2be4
Faulting application start time: 0x01d55a9d505985b8
Faulting application path: C:\Program Files (x86)\Addon Manager\Couatl\Couatl.exe
Faulting module path: C:\WINDOWS\System32\ucrtbase.dll
Report Id: ce59a56b-c879-4c14-9b39-76590555bf7d
Faulting package full name:
Faulting package-relative application ID:

[virtuali]

You don't seem to have read my previous message accurately enough...

Read the explanation in this thread, and see if it might apply to you:

http://www.fsdreamteam.com/forum/index.php/topic,21730.msg147606.html#msg147606

In any case, I can see already you must have some kind of problem, because you have an outdated version of Couatl.exe, which of course is not possible to get, since the current one is always downloaded by the installer. So, there surely must be something related to the updater being blocked by an antivirus or firewall.

[fernandito]

Wao!..After so much testing and following procedures, I have finally discovered the process for the GSXLv2 jetways to appear and remain however, prior to the latest update, once I have created the new jetway and updated at the FSDT Control Panel and compiled the default jetway would disappeared leaving an empty spot and then the new created jetway will be reposition in it's place. This it's NOT occurring now!. Both jetways appears at the gate spot. Any advise how to correct this??. That's for all addon airports that I have in my PD3v4.5 SIM. ...Correction!..After further testing KATL & KMIA was a (Go). KFLL,KIAD,WIII,RKSS and a few more-(NoGo). Further testing in progress.