Author Topic: Coutl constantly crashing with recent update  (Read 9711 times)

Speedbird ATC

  • Full Member
  • ***
  • Posts: 130
Coutl constantly crashing with recent update
« on: June 13, 2016, 02:02:14 am »
After this recent update, coutl has been extremely prone to crashes, generally after arrival at a gate. Attached is a screenshot of the error, and my log.


virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51437
    • VIRTUALI Sagl
Re: Coutl constantly crashing with recent update
« Reply #1 on: June 13, 2016, 09:42:45 am »
After this recent update, coutl has been extremely prone to crashes, generally after arrival at a gate. Attached is a screenshot of the error, and my log.

Nothing in the recent update can have anything to do with this specific error, since nothing has changed in the FollowMe.

The "cruise speed must be positive" error has been reported and explained many times on the forum in the past, and (especially in case of the FollowMe, that must check the whole airport), it's usually an indication of a problem in the scenery, like overlapping nodes, orphaned nodes, unconnected links, unreachable parkings, etc.

Speedbird ATC

  • Full Member
  • ***
  • Posts: 130
Re: Coutl constantly crashing with recent update
« Reply #2 on: June 13, 2016, 10:46:25 pm »
Before this update, I never had this issue. I have had this error at airports that used to work just fine!
« Last Edit: June 13, 2016, 10:52:44 pm by Speedbird ATC »

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51437
    • VIRTUALI Sagl
Re: Coutl constantly crashing with recent update
« Reply #3 on: June 14, 2016, 11:55:20 am »
Before this update, I never had this issue. I have had this error at airports that used to work just fine!

As I've said, nothing in the recent update can have anything to do with this specific error, since nothing has changed in the FollowMe.

This error happens because there's some problem in the scenery at a certain point but, if the path chosen by the vehicle won't have to pass through the problematic area, there will be no error.

You might have not noticed it just for pure luck, for the simple reason the FollowMe will start from a RANDOM parking each time, so the path chosen is not always the same.

Guenseli

  • Full Member
  • ***
  • Posts: 122
Re: Coutl constantly crashing with recent update
« Reply #4 on: June 14, 2016, 08:13:18 pm »
I have the exact same error message and the same error log

Airport cache regeneration completed with success in 4 seconds
Traceback (most recent call last):
  File "couatl\common\__init__.py", line 114, in onSimStop
  File "couatl\common\simulatorModes.py", line 76, in onSimStop
AttributeError: 'module' object has no attribute 'avatarModeEnabled'
{}
Loading aircraft data from Airplanes\beech_baron_58



But I run Prepar3D 3.3.5

As I see it in the log: I have switched off Avatar Mode!


jadolfo

  • Newbie
  • *
  • Posts: 17
Re: Coutl constantly crashing with recent update
« Reply #5 on: June 14, 2016, 08:20:51 pm »
Hi,

I have the same problem:

couatl v3.1 (build 3469)
panic log started on Tue Jun 14 20:17:59 2016

problem raised by addon <unknown>
Traceback (most recent call last):
  File "couatl\common\__init__.py", line 110, in onSimStart
  File "couatl\common\simulatorModes.py", line 69, in onSimStart
AttributeError: 'module' object has no attribute 'avatarModeEnabled'
{}
Loading aircraft data from Airplanes\Piper_J3Cub
Using aircraft data from SimConnect
Near airport 'leax' has a visibility range of 3 miles
Loading airport LEAX from F:\Prepar3D v3\Scenery\0502\scenery\APX46180.bgl
Added Menu SubItem "Customize airport positions..." (parentId 82, id 99)
Traceback (most recent call last):
  File "couatl\common\__init__.py", line 114, in onSimStop
  File "couatl\common\simulatorModes.py", line 76, in onSimStop
AttributeError: 'module' object has no attribute 'avatarModeEnabled'
{'Airport': 'LEAX', 'User Pos': (36.798811111054704, -4.1286111111104615, 40.3174 m, 1.30342 m, 306.99999070916)}

Please, anybody help us?

Thanks and best regards.
J. Adolfo Medina

fatih425

  • Newbie
  • *
  • Posts: 15
Re: Coutl constantly crashing with recent update
« Reply #6 on: June 14, 2016, 09:36:46 pm »
couatl v3.1 (build 3487)
panic log started on Tue Jun 14 21:37:16 2016

problem raised by addon <unknown>
Traceback (most recent call last):
  File "couatl\GSX\assistanceServices\__init__.py", line 1225, in willMaterialize
  File "couatl\common\criticalsection.py", line 23, in _synchronized
  File "couatl\GSX\assistanceServices\baggageLoader.py", line 87, in materialize
  File "couatl\common\criticalsection.py", line 23, in _synchronized
  File "couatl\GSX\assistanceServices\baseAssistanceVehicle.py", line 92, in materialize
RuntimeError: attempt to use an invalid SimObject instance
{'Airport': 'LTCJ', 'Requested assistance services at': 'Gate 2', 'User Pos': (37.94547446085361, 41.121063418686376, 558.549 m, 4.42265 m, 343.2999894742821)}


installed last full installer and i get this message my 40 euro is for nothing ....

Aang72

  • Jr. Member
  • **
  • Posts: 81
Re: Coutl constantly crashing with recent update
« Reply #7 on: June 14, 2016, 10:07:07 pm »
I get similar errors.  

Again, this happened after the last update.  it happens whenever I request GSX in an option, like deboarding, Catering etc

I also get this error:

couatl v3.1 (build 3487)
panic log started on Tue Jun 14 16:21:55 2016

problem raised by engine or unspecified addon
{'Airport': 'PHOG', 'Requested assistance services at': 'Gate G 13', 'User Pos': (20.893988896812765, -156.43598612431202, 18.9156 m, 2.45663 m, 302.87695136786044)}
Error: exception UNRECOGNIZED_ID in call RequestDataOnSimObject param #3 '36'
{'Airport': 'PHOG', 'Requested assistance services at': 'Gate G 13', 'User Pos': (20.893988896812765, -156.43598612431202, 18.9156 m, 2.45663 m, 302.87695136786044)}
delay =  6000 kind 0
delay =  0 kind 1
Traceback (most recent call last):
  File "couatl\common\fsm.py", line 67, in executeDoFuncToCompletion
  File "couatl\GSX\assistanceServices\baseAssistanceVehicle.py", line 262, in do
TypeError: 'NoneType' object has no attribute '__getitem__'
{'Airport': 'PHOG', 'Requested assistance services at': 'Gate G 13', 'User Pos': (20.89398889713812, -156.43598612484953, 18.866 m, 2.40696 m, 302.87695164285594)}
« Last Edit: June 14, 2016, 10:19:35 pm by Aang72 »

speedbird217

  • Newbie
  • *
  • Posts: 11
Re: Coutl constantly crashing with recent update
« Reply #8 on: June 14, 2016, 11:13:42 pm »
Same here. After installing the latest update, Couatl crashes every time I load P3D with the previously mentioned error message.
This is on a fresh install of P3D (reinstalled Win10 + P3D last weekend).

crash77

  • Newbie
  • *
  • Posts: 29
Re: Coutl constantly crashing with recent update
« Reply #9 on: June 15, 2016, 01:30:10 am »
Same thing man.  EVERYTHING was FINE before this update........now everytime I select catering service for my PMDG 777, GSX crashes.  With the KMEM scenery it stopped letting me use the catering option for my PMDG 737 at any airport, but it didnt crash GSX.(I made a post)  I'm running FSX Accel.  I dont know why but it seems like everytime their is an update GSX starts messing up......anyways here is the error:


couatl v3.1 (build 3469)
panic log started on Tue Jun 14 19:27:44 2016

problem raised by addon <unknown>
Traceback (most recent call last):
  File "couatl\common\fsm.py", line 61, in switchToState
  File "couatl\GSX\assistanceServices\__init__.py", line 590, in enter
  File "couatl\common\criticalsection.py", line 23, in _synchronized
  File "couatl\GSX\assistanceServices\__init__.py", line 141, in requestVehicles
  File "couatl\GSX\__init__.py", line 808, in prepareGate
  File "couatl\GSX\assistanceServices\__init__.py", line 1343, in setGate
  File "couatl\GSX\assistanceServices\jetwayOperations.py", line 76, in setGate
AttributeError: 'Couatl.Parking' object has no attribute '_bglName'
{'Airport': 'KATL', 'Requested assistance services at': 'Gate F 6', 'User Pos': (33.63862896803884, -84.42043338419137, 316.863 m, 4.13918 m, 90.08152224733395)}

ogruetzmann

  • Newbie
  • *
  • Posts: 10
Re: Coutl constantly crashing with recent update
« Reply #10 on: June 15, 2016, 01:35:29 am »
Hi,

had the same issue, occuring just after the update while still sitting at the gate.
It was solved by downloading and using the full installer.

Oliver.

Aang72

  • Jr. Member
  • **
  • Posts: 81
Re: Coutl constantly crashing with recent update
« Reply #11 on: June 15, 2016, 02:20:45 am »
I have done that as well and still has the same issues.

B777ER

  • Sr. Member
  • ****
  • Posts: 376
Re: Coutl constantly crashing with recent update
« Reply #12 on: June 15, 2016, 07:09:42 am »
Got this error earlier tonight. Usually FSDT's stuff "just works" but not now....
Eric

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51437
    • VIRTUALI Sagl
Re: Coutl constantly crashing with recent update
« Reply #13 on: June 15, 2016, 01:25:42 pm »
All of you with a Couatl 3469 version in your log: the errors are caused because you haven't installed the yesterday's update, which should have prompted you to download and install the latest Stand-Alone Addon Manager.

We'll check about the remaining errors related to the current version.

virtuali

  • Administrator
  • Hero Member
  • *****
  • Posts: 51437
    • VIRTUALI Sagl
Re: Coutl constantly crashing with recent update
« Reply #14 on: June 15, 2016, 02:54:57 pm »
Again, this happened after the last update.  it happens whenever I request GSX in an option, like deboarding, Catering etc

I tried doing the same, Deboarding the default A321 at PHOG G13, and I don't have any errors. Check your FSX.CFG if all your Simobjectpaths lines are correct, as explained here:

http://www.fsdreamteam.com/forum/index.php/topic,13067.msg97882.html#msg97882